Seagate
Seagate XP800LE10005 Nytro 5550M 800GB enterprise SSD
Enterprise 2.5" 7mm NVMe SSD delivering 6000 MB/s reads and 1900 MB/s writes with 4300 TBW endurance
- Used ForConsumer
- Form Factor2.5" 7mm
- Capacity800GB
- Memory Components3D eTLC
- InterfacePCI-Express 4.0 x4
- ProtocolNVMe
- Up to 6000 MB/s sequential read for fast data access
- Up to 1,000,000 IOPS random read for high transaction workloads
- 4300 TBW endurance for long write life
- 5 million hour MTBF for enterprise reliability
- PCIe 4.0 x4 NVMe interface for modern server platforms
800GB PCIe 4.0 NVMe Enterprise Drive
The Seagate Nytro 5550M XP800LE10005 is an 800GB enterprise solid-state drive built for PCIe 4.0 x4 slots. It uses 3D eTLC NAND and the NVMe protocol to deliver sustained sequential reads up to 6000 MBps and writes up to 1900 MBps. Random read performance reaches 1,000,000 IOPS with 140,000 IOPS for random writes. The drive is rated for 4300TB written and a 2,500,000-hour MTBF.
Suited for high-throughput server workloads
This drive fits servers and storage arrays that need consistent low-latency NVMe performance over a PCIe 4.0 interface. The 2.5-inch 7mm form factor suits standard hot-swap bays. It is not for buyers who require hardware-based encryption on the drive itself. Systems limited to PCIe 3.0 or without NVMe support cannot use this drive at its rated speed.
PCIe 4.0 x4 NVMe interface decides compatibility
The single specification that determines fit is the PCIe 4.0 x4 NVMe connection. Your backplane or motherboard must provide this exact electrical and protocol link. If the slot is PCIe 3.0 only, or uses a different protocol, the drive will not operate as specified.
Besonderheiten
- Up to 6000 MB/s sequential read for fast data access
- Up to 1,000,000 IOPS random read for high transaction workloads
- 4300 TBW endurance for long write life
- 5 million hour MTBF for enterprise reliability
- PCIe 4.0 x4 NVMe interface for modern server platforms
Technische Daten
| Brand | Seagate |
|---|---|
| Series | Nytro 5550M |
| Model | XP800LE10005 |
| Used For | Consumer |
| Form Factor | 2.5" 7mm |
| Capacity | 800GB |
| Memory Components | 3D eTLC |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 6000 MBps |
| Max Sequential Write | Up to 1900 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 140,000 IOPS |
| Read Latency | 90µs |
| Write Latency | 12µs |
| Terabytes Written (TBW) | 4300TB |
| MTBF | 2,500,000 hours |
| Power Consumption (Idle) | 12.5W |
| Power Consumption (Active) | 5W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Height | 7.1mm |
| Width | 70.1mm |
| Depth | 100.4mm |
| Weight | 105g |
| Versandgewicht | 0.45 kg |
| Paketgröße | 25 × 25 × 25 mm |
Fragen zu diesem Artikel
How can I confirm the Nytro 5550M is delivering its rated 6,000 MB/s sequential read speed after installation?
Run a sustained 128 KB sequential read test at queue depth 64; the drive should report up to 6,000 MB/s and 90 µs average read latency.
What ships with the XP800LE10005 and what must I source separately?
The bare 2.5" 7 mm drive ships alone; you must supply a U.2 or PCIe 4.0 x4 carrier, 12 V power, and any mounting hardware.
Which capacity in the Nytro 5550M line matches a 3 DWPD workload with 4,300 TB total endurance?
The 800 GB model provides exactly 4,300 TB written and 3 drive writes per day over five years.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
