Thermal Grizzly Aeronaut TG-A-030-R 7.8g thermal paste
- 1.0g
- 8.5 W/mK
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Thermal Grizzly
High-performance thermal compound with 8.5 W/mK conductivity for CPUs, GPUs and consoles in a 1.0 g syringe
Thermal Grizzly Aeronaut is a 1.0 g syringe of non-electrically-conductive thermal compound rated at 8.5 W/mK thermal conductivity and 0.0129 K/W thermal resistance. It targets DIY builders and technicians who want a reliable, easy-to-apply paste for CPUs, GPUs and console coolers without the risk of short circuits. The syringe design places material precisely on the die or heat spreader.
Swapping factory-applied or aged compound for Aeronaut can lower junction temperatures immediately after the first mount. The jump is worth it when the original paste has pumped out, cracked or was applied too thickly, or when a builder wants a non-curing formula that survives repeated thermal cycles from -150 °C to +200 °C. It is not for users who need the absolute highest conductivity metal-based pastes provide.
The 1.0 g / 1.5 ml fill suits a single CPU or GPU application with a small safety margin; larger dies, direct-die laptop chips or multiple consoles may require a second syringe. Viscosity of 110–160 Pa·s resists pump-out but demands steady pressure for thin, even spreading. The paste contains no electrically conductive particles, so accidental overflow onto PCB traces is harmless.
| Brand | Thermal Grizzly |
|---|---|
| Series | Aeronaut |
| Volume / Net Weight | 1.0g |
| Thermal Conductivity | 8.5 W/Mk |
| Long Term Operating Temperature | 150 °C / +200°C |
| Features | Thermal Resistance: 0,0129 K/W Electrical Conductivity: 0 pS/m Viscosity: 110–160 Pas SpecificWeight: 2,6g/cm3 Temperature: -150 °C / +200°C Capacity: 1g | 1,5ml/3,9g | 3ml/7,8g | 10ml/26g |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The 1.0 g volume is typically sufficient for several CPU or GPU mounts, as each application only requires a small pea-sized amount.
Dispense a small dot onto the centre of the die, then mount the cooler straight down; avoid spreading it manually, which can trap air bubbles.
The paste is rated for continuous operation up to 150 °C with no curing, so it maintains performance without scheduled replacement.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?