אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Nine small rectangular foam gaskets on a clear transfer sheet, each shaped for RTX 4090, 5080 and 5090 GPU dies

Thermal Grizzly

Thermal Grizzly TG-GG-01 GPU Guard Gasket RTX 4090/5080/5090 9pcs

SKU CH-093G-JN7JR

Protects GPU components from conductive thermal materials with compressible foam gaskets for RTX 4090, 5080 and 5090 dies

  • FeaturesHighly compressible foam gasket for GPUs, designed to protec
  • Highly compressible foam from 0.8 mm to 0.15 mm for even mounting pressure
  • Shields surface-mounted devices from conductive liquid metal spills
  • Extends liquid metal lifespan by blocking oxygen exposure
  • Includes three gaskets each for RTX 4090, 5080 and 5090 dies
  • Supplied on transfer film for straightforward placement before applying thermal compound

GPU Guard Gasket for RTX 4090 5080 5090

The Thermal Grizzly TG-GG-01 is a highly compressible foam gasket set designed for GPU dies on GeForce RTX 4090 5080 and 5090 graphics cards. It protects surrounding surface-mounted devices when using liquid metal or other electrically conductive thermal interface materials. The package contains nine pieces covering all three supported models.

Upgrade from bare die application

Builders who currently apply liquid metal directly to the die without a barrier gain protection against short circuits from spills onto nearby components. The jump is worth it when switching to conductive compounds or when seeking longer liquid metal durability through oxygen isolation. The gasket compresses from 0.8 mm down to 0.15 mm under mounting pressure to bridge height differences.

Nine gaskets covering three dies

The set includes three gaskets each for RTX 4090 5080 and 5090 dies providing enough pieces for multiple installations or replacements. It comfortably handles liquid metal applications on supported GPUs while preventing compound spread and oxidation. It runs out when used on unsupported GPUs or CPUs as the product is not reusable and not designed for processor dies.

נקודות עיקריות

  • Highly compressible foam from 0.8 mm to 0.15 mm for even mounting pressure
  • Shields surface-mounted devices from conductive liquid metal spills
  • Extends liquid metal lifespan by blocking oxygen exposure
  • Includes three gaskets each for RTX 4090, 5080 and 5090 dies
  • Supplied on transfer film for straightforward placement before applying thermal compound

מפרט טכני

BrandThermal Grizzly
ModelTG-GG-01
Part NumberTG-GG-01
FeaturesHighly compressible foam gasket for GPUs, designed to protect electronic components when using liquid metal or other electrically conductive thermal interface materials, while at the same time increasing the lifespan of liquid metal.

שאלות על הפריט הזה

How thick is the foam gasket before and after compression?

The gasket starts at 0.8 mm and compresses down to 0.15 mm to match SMD height differences.

What does the transfer film do during installation?

It holds each gasket in position so you can place it on the die before applying liquid metal.

When do the gaskets need to be replaced?

They are single-use; install a fresh set whenever you reapply liquid metal.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.