NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Formula V Line
Mid-tower chassis with curved tempered glass front, EATX support, 420mm GPU clearance, top 360mm radiator mount, and four pre-installed ARGB fans
The Formula V Line Crystal U9 PA is a mid-tower chassis built from black SPCC steel with a curved tempered glass front panel. It accepts ATX, EATX, Micro-ATX and Mini-ITX motherboards and provides seven expansion slots for full-size builds. A dual-chamber layout separates the bottom-mounted power supply from the main compartment for cleaner cable routing. Four PA120 ARGB PWM fans are pre-installed on the motherboard side and rear.
This case suits enthusiasts who want a showcase build with a curved glass front and strong top-mounted liquid cooling support up to 360mm. It fits graphics cards up to 420mm and CPU coolers up to 182mm. Builders who need more than one 3.5-inch bay or a single 2.5-inch bay should look elsewhere. The side fan mounts are occupied by the included fans, limiting alternative side intake configurations.
The decisive specification is the top panel radiator support limited to 360mm, which sets the maximum liquid cooling capacity for the chassis. Combined with the 420mm GPU length and 182mm CPU cooler height allowances, this figure determines whether a planned high-performance thermal solution will fit. The case measures 480 x 235 x 484mm and weighs 9.84kg.
| Brand | Formula V Line |
|---|---|
| Model | Crystal U9 PA |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | SPCC / Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Front Ports | Type C, 2 x USB3.0, HD Audio |
| Fan Options | Bottom - 2 x 120mm / Front - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 3 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Pre-installed Fans | MB Side: 3 x 120mm (PA120 fan x3 Included) Rear: 1 x PA120 fan Included |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 182 mm |
| Dimensions | 480 x 235 x 484mm |
| Weight | 9.84 kg |
| Težina pošiljke | 9.80 kg |
| Dimenzije pakiranja | 546 × 546 × 300 mm |
The chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards and clears graphics cards up to 420 mm long.
Connect the PWM and ARGB cables to the motherboard headers then verify fan speed and lighting control through the board's fan-tuning software or BIOS.
No power supply is included; the case has a bottom-mounted PSU bay so you will need to purchase a standard ATX unit separately.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?