NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
Formula V Line
Mid-tower chassis with curved tempered glass front, EATX support, 420mm GPU clearance, top 360mm radiator mount, and four pre-installed ARGB fans
The Formula V Line Crystal U9 PA is a mid-tower chassis built from black SPCC steel with a curved tempered glass front panel. It accepts ATX, EATX, Micro-ATX and Mini-ITX motherboards and provides seven expansion slots for full-size builds. A dual-chamber layout separates the bottom-mounted power supply from the main compartment for cleaner cable routing. Four PA120 ARGB PWM fans are pre-installed on the motherboard side and rear.
This case suits enthusiasts who want a showcase build with a curved glass front and strong top-mounted liquid cooling support up to 360mm. It fits graphics cards up to 420mm and CPU coolers up to 182mm. Builders who need more than one 3.5-inch bay or a single 2.5-inch bay should look elsewhere. The side fan mounts are occupied by the included fans, limiting alternative side intake configurations.
The decisive specification is the top panel radiator support limited to 360mm, which sets the maximum liquid cooling capacity for the chassis. Combined with the 420mm GPU length and 182mm CPU cooler height allowances, this figure determines whether a planned high-performance thermal solution will fit. The case measures 480 x 235 x 484mm and weighs 9.84kg.
| Brand | Formula V Line |
|---|---|
| Model | Crystal U9 PA |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | SPCC / Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Front Ports | Type C, 2 x USB3.0, HD Audio |
| Fan Options | Bottom - 2 x 120mm / Front - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 3 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Pre-installed Fans | MB Side: 3 x 120mm (PA120 fan x3 Included) Rear: 1 x PA120 fan Included |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 182 mm |
| Dimensions | 480 x 235 x 484mm |
| Weight | 9.84 kg |
| Forsendelsesvægt | 9.80 kg |
| Pakkestørrelse | 546 × 546 × 300 mm |
The chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards and clears graphics cards up to 420 mm long.
Connect the PWM and ARGB cables to the motherboard headers then verify fan speed and lighting control through the board's fan-tuning software or BIOS.
No power supply is included; the case has a bottom-mounted PSU bay so you will need to purchase a standard ATX unit separately.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?