NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Formula V Line
Mid-tower chassis with curved tempered glass front, EATX support, 420mm GPU clearance, top 360mm radiator mount, and four pre-installed ARGB fans
The Formula V Line Crystal U9 PA is a mid-tower chassis built from black SPCC steel with a curved tempered glass front panel. It accepts ATX, EATX, Micro-ATX and Mini-ITX motherboards and provides seven expansion slots for full-size builds. A dual-chamber layout separates the bottom-mounted power supply from the main compartment for cleaner cable routing. Four PA120 ARGB PWM fans are pre-installed on the motherboard side and rear.
This case suits enthusiasts who want a showcase build with a curved glass front and strong top-mounted liquid cooling support up to 360mm. It fits graphics cards up to 420mm and CPU coolers up to 182mm. Builders who need more than one 3.5-inch bay or a single 2.5-inch bay should look elsewhere. The side fan mounts are occupied by the included fans, limiting alternative side intake configurations.
The decisive specification is the top panel radiator support limited to 360mm, which sets the maximum liquid cooling capacity for the chassis. Combined with the 420mm GPU length and 182mm CPU cooler height allowances, this figure determines whether a planned high-performance thermal solution will fit. The case measures 480 x 235 x 484mm and weighs 9.84kg.
| Brand | Formula V Line |
|---|---|
| Model | Crystal U9 PA |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | SPCC / Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Front Ports | Type C, 2 x USB3.0, HD Audio |
| Fan Options | Bottom - 2 x 120mm / Front - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 3 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Pre-installed Fans | MB Side: 3 x 120mm (PA120 fan x3 Included) Rear: 1 x PA120 fan Included |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 182 mm |
| Dimensions | 480 x 235 x 484mm |
| Weight | 9.84 kg |
| Тегло на пратката | 9.80 kg |
| Размери на опаковката | 546 × 546 × 300 mm |
The chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards and clears graphics cards up to 420 mm long.
Connect the PWM and ARGB cables to the motherboard headers then verify fan speed and lighting control through the board's fan-tuning software or BIOS.
No power supply is included; the case has a bottom-mounted PSU bay so you will need to purchase a standard ATX unit separately.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?