NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Formula V Line
Mid-tower chassis with curved tempered glass front, EATX support, 420mm GPU clearance, top 360mm radiator mount, and four pre-installed ARGB fans
The Formula V Line Crystal U9 PA is a mid-tower chassis built from black SPCC steel with a curved tempered glass front panel. It accepts ATX, EATX, Micro-ATX and Mini-ITX motherboards and provides seven expansion slots for full-size builds. A dual-chamber layout separates the bottom-mounted power supply from the main compartment for cleaner cable routing. Four PA120 ARGB PWM fans are pre-installed on the motherboard side and rear.
This case suits enthusiasts who want a showcase build with a curved glass front and strong top-mounted liquid cooling support up to 360mm. It fits graphics cards up to 420mm and CPU coolers up to 182mm. Builders who need more than one 3.5-inch bay or a single 2.5-inch bay should look elsewhere. The side fan mounts are occupied by the included fans, limiting alternative side intake configurations.
The decisive specification is the top panel radiator support limited to 360mm, which sets the maximum liquid cooling capacity for the chassis. Combined with the 420mm GPU length and 182mm CPU cooler height allowances, this figure determines whether a planned high-performance thermal solution will fit. The case measures 480 x 235 x 484mm and weighs 9.84kg.
| Brand | Formula V Line |
|---|---|
| Model | Crystal U9 PA |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | SPCC / Steel |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Dust Filters | Bottom / Top |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 7 |
| Front Ports | Type C, 2 x USB3.0, HD Audio |
| Fan Options | Bottom - 2 x 120mm / Front - 2 x 140mm / Front - 3 x 120mm / Rear - 1 x 120mm / Rear - 1 x 140mm / Side - 3 x 120mm / Top - 2 x 140mm / Top - 3 x 120mm |
| Pre-installed Fans | MB Side: 3 x 120mm (PA120 fan x3 Included) Rear: 1 x PA120 fan Included |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 420 mm |
| Max CPU Cooler Height | 182 mm |
| Dimensions | 480 x 235 x 484mm |
| Weight | 9.84 kg |
| Lähetyspaino | 9.80 kg |
| Pakkauksen mitat | 546 × 546 × 300 mm |
The chassis supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards and clears graphics cards up to 420 mm long.
Connect the PWM and ARGB cables to the motherboard headers then verify fan speed and lighting control through the board's fan-tuning software or BIOS.
No power supply is included; the case has a bottom-mounted PSU bay so you will need to purchase a standard ATX unit separately.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?