Phanteks PH-F140D30R_DRGB_PWM_BK01 140 mm 30 mm reverse airflow case fan
- 1 Fan
- Case Fan
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Phanteks
Three white 120 mm fans with reversed blades, daisy-chain frames and a single Linq6 cable for PWM and D-RGB control
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Triple Fans
Precrtane verzije postoje, ali nisu dostupne ovdje.
This triple pack supplies three 120 mm Phanteks M25 Gen2 Reversed fans with white matte blades and DRGB lighting. Each unit uses a hydraulic bearing and spins between 350 and 2000 RPM, delivering up to 73.69 CFM and 1.99 mmH₂O static pressure at a maximum of 39.28 dBA. The Linq6 daisy-chain system merges PWM control and lighting into a single cable run.
Builders who want matching intake or exhaust arrays with minimal wiring will benefit from the interlocking frame and included 500 mm extension cables. The reversed blade orientation targets radiator and heatsink restriction, so pure unrestricted case airflow is not the primary design goal. Buyers needing a hardware controller in the box should look elsewhere.
The defining specification is the reversed blade profile, which pushes air through dense fin stacks more effectively than standard blades. If the fans will mount on open mesh or serve as simple exhaust, the regular M25 Gen2 variant matches the same performance envelope without the reversed geometry.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 3x Fan Screws: 14x 500mm Linq6 Extension Cable: 2x 500mm Linq6 M/B Adapter: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 4x Installation Guide: 1x |
| Težina pošiljke | 0.77 kg |
| Dimenzije pakiranja | 406 × 152 × 64 mm |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Choose the reversed-blade pack when you want the fans to pull air through a radiator or heatsink from the opposite side; the standard version pushes air in the normal direction.
At 2000 RPM the three fans move up to 73.69 CFM each with 1.99 mmH2O static pressure, enough to push or pull air through dense radiator fins while staying at 39.28 dBA.
The 500 mm Linq6 cables link all three fans together, then the included motherboard adapter plugs into a single 4-pin PWM header for both speed and DRGB control.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?