Phanteks PH-F140D30R_DRGB_PWM_BK01 140 mm 30 mm reverse airflow case fan
- 1 Fan
- Case Fan
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Phanteks
Three white 120 mm fans with reversed blades, daisy-chain frames and a single Linq6 cable for PWM and D-RGB control
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Triple Fans
Prečrtane različice obstajajo, vendar tukaj niso na voljo.
This triple pack supplies three 120 mm Phanteks M25 Gen2 Reversed fans with white matte blades and DRGB lighting. Each unit uses a hydraulic bearing and spins between 350 and 2000 RPM, delivering up to 73.69 CFM and 1.99 mmH₂O static pressure at a maximum of 39.28 dBA. The Linq6 daisy-chain system merges PWM control and lighting into a single cable run.
Builders who want matching intake or exhaust arrays with minimal wiring will benefit from the interlocking frame and included 500 mm extension cables. The reversed blade orientation targets radiator and heatsink restriction, so pure unrestricted case airflow is not the primary design goal. Buyers needing a hardware controller in the box should look elsewhere.
The defining specification is the reversed blade profile, which pushes air through dense fin stacks more effectively than standard blades. If the fans will mount on open mesh or serve as simple exhaust, the regular M25 Gen2 variant matches the same performance envelope without the reversed geometry.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 3x Fan Screws: 14x 500mm Linq6 Extension Cable: 2x 500mm Linq6 M/B Adapter: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 4x Installation Guide: 1x |
| Teža pošiljke | 0.77 kg |
| Velikost pošiljke | 406 × 152 × 64 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Choose the reversed-blade pack when you want the fans to pull air through a radiator or heatsink from the opposite side; the standard version pushes air in the normal direction.
At 2000 RPM the three fans move up to 73.69 CFM each with 1.99 mmH2O static pressure, enough to push or pull air through dense radiator fins while staying at 39.28 dBA.
The 500 mm Linq6 cables link all three fans together, then the included motherboard adapter plugs into a single 4-pin PWM header for both speed and DRGB control.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?