Phanteks PH-F140D30R_DRGB_PWM_BK01 140 mm 30 mm reverse airflow case fan
- 1 Fan
- Case Fan
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Phanteks
Three white 120 mm fans with reversed blades, daisy-chain frames and a single Linq6 cable for PWM and D-RGB control
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Triple Fans
Versiunile tăiate există, dar nu sunt disponibile aici.
This triple pack supplies three 120 mm Phanteks M25 Gen2 Reversed fans with white matte blades and DRGB lighting. Each unit uses a hydraulic bearing and spins between 350 and 2000 RPM, delivering up to 73.69 CFM and 1.99 mmH₂O static pressure at a maximum of 39.28 dBA. The Linq6 daisy-chain system merges PWM control and lighting into a single cable run.
Builders who want matching intake or exhaust arrays with minimal wiring will benefit from the interlocking frame and included 500 mm extension cables. The reversed blade orientation targets radiator and heatsink restriction, so pure unrestricted case airflow is not the primary design goal. Buyers needing a hardware controller in the box should look elsewhere.
The defining specification is the reversed blade profile, which pushes air through dense fin stacks more effectively than standard blades. If the fans will mount on open mesh or serve as simple exhaust, the regular M25 Gen2 variant matches the same performance envelope without the reversed geometry.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 3x Fan Screws: 14x 500mm Linq6 Extension Cable: 2x 500mm Linq6 M/B Adapter: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 4x Installation Guide: 1x |
| Greutate la expediere | 0.77 kg |
| Dimensiunile coletului | 406 × 152 × 64 mm |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Choose the reversed-blade pack when you want the fans to pull air through a radiator or heatsink from the opposite side; the standard version pushes air in the normal direction.
At 2000 RPM the three fans move up to 73.69 CFM each with 1.99 mmH2O static pressure, enough to push or pull air through dense radiator fins while staying at 39.28 dBA.
The 500 mm Linq6 cables link all three fans together, then the included motherboard adapter plugs into a single 4-pin PWM header for both speed and DRGB control.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?