Phanteks PH-F140D30R_DRGB_PWM_BK01 140 mm 30 mm reverse airflow case fan
- 1 Fan
- Case Fan
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Phanteks
Three white 120 mm fans with reversed blades, daisy-chain frames and a single Linq6 cable for PWM and D-RGB control
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Triple Fans
Preškrtnuté verzie existujú, ale nie sú tu skladom.
This triple pack supplies three 120 mm Phanteks M25 Gen2 Reversed fans with white matte blades and DRGB lighting. Each unit uses a hydraulic bearing and spins between 350 and 2000 RPM, delivering up to 73.69 CFM and 1.99 mmH₂O static pressure at a maximum of 39.28 dBA. The Linq6 daisy-chain system merges PWM control and lighting into a single cable run.
Builders who want matching intake or exhaust arrays with minimal wiring will benefit from the interlocking frame and included 500 mm extension cables. The reversed blade orientation targets radiator and heatsink restriction, so pure unrestricted case airflow is not the primary design goal. Buyers needing a hardware controller in the box should look elsewhere.
The defining specification is the reversed blade profile, which pushes air through dense fin stacks more effectively than standard blades. If the fans will mount on open mesh or serve as simple exhaust, the regular M25 Gen2 variant matches the same performance envelope without the reversed geometry.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 3x Fan Screws: 14x 500mm Linq6 Extension Cable: 2x 500mm Linq6 M/B Adapter: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 4x Installation Guide: 1x |
| Prepravná hmotnosť | 0.77 kg |
| Rozmery balenia | 406 × 152 × 64 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Choose the reversed-blade pack when you want the fans to pull air through a radiator or heatsink from the opposite side; the standard version pushes air in the normal direction.
At 2000 RPM the three fans move up to 73.69 CFM each with 1.99 mmH2O static pressure, enough to push or pull air through dense radiator fins while staying at 39.28 dBA.
The 500 mm Linq6 cables link all three fans together, then the included motherboard adapter plugs into a single 4-pin PWM header for both speed and DRGB control.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?