Thermaltake CL-F143-PL12SW-A SWAFAN EX 12 RGB 3-pack 120 mm case fan
- 3 Fans
- Controller
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Thermaltake
Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs
Fan Size 140mm
Model SWAFAN
This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.
Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.
The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.
| Brand | Thermaltake |
|---|---|
| Series | SWAFAN |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500 ~ 2000 R.P.M |
| Air Flow | Fan Blade 1 : 77.6 CFM (only one fan) Fan Blade 2 : 71.3 CFM (only one fan) |
| Power Connector | USB 2.0 connectors (9 Pin) |
| Color | Black |
| LED | RGB |
| Szállítási súly | 1.41 kg |
| Csomagméret | 185 × 183 × 150 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.
At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.
The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?