Thermaltake CL-F143-PL12SW-A SWAFAN EX 12 RGB 3-pack 120 mm case fan
- 3 Fans
- Controller
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Thermaltake
Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs
Fan Size 140mm
Model SWAFAN
This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.
Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.
The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.
| Brand | Thermaltake |
|---|---|
| Series | SWAFAN |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500 ~ 2000 R.P.M |
| Air Flow | Fan Blade 1 : 77.6 CFM (only one fan) Fan Blade 2 : 71.3 CFM (only one fan) |
| Power Connector | USB 2.0 connectors (9 Pin) |
| Color | Black |
| LED | RGB |
| Sūtījuma svars | 1.41 kg |
| Sūtījuma izmēri | 185 × 183 × 150 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.
At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.
The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?