我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Thermaltake

Thermaltake SWAFAN 14 RGB 3-pack 140mm 2000 RPM CL-F138-PL14SW-A

SKU CH-DWGM-R4JH3 MPN CL-F138-PL14SW-A

Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic

Fan Size 140mm

Model SWAFAN

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

Swappable Blade Kit for RGB Builds

This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.

USB 2.0 Header Limits and Blade Swap Trade-offs

Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.

Hydraulic Bearing at 2000 RPM Peak

The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.

商品特色

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

商品規格

BrandThermaltake
SeriesSWAFAN
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air FlowFan Blade 1 : 77.6 CFM (only one fan)
Fan Blade 2 : 71.3 CFM (only one fan)
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
出貨重量1.41 kg
包裝尺寸185 × 183 × 150 mm

其他版本

同系列還有 3 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Should I install the standard or reverse blades for my front intake?

Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.

What does 2000 RPM actually deliver inside a case?

At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.

How does the USB 2.0 9-pin connector limit RGB control?

The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。