Thermaltake CL-F143-PL12SW-A SWAFAN EX 12 RGB 3-pack 120 mm case fan
- 3 Fans
- Controller
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Thermaltake
Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs
Fan Size 140mm
Model SWAFAN
This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.
Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.
The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.
| Brand | Thermaltake |
|---|---|
| Series | SWAFAN |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500 ~ 2000 R.P.M |
| Air Flow | Fan Blade 1 : 77.6 CFM (only one fan) Fan Blade 2 : 71.3 CFM (only one fan) |
| Power Connector | USB 2.0 connectors (9 Pin) |
| Color | Black |
| LED | RGB |
| Verzendgewicht | 1.41 kg |
| Pakketafmetingen | 185 × 183 × 150 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.
At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.
The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?