Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Three black 140mm RGB case fans with swappable blades and controller

Thermaltake

Thermaltake SWAFAN 14 RGB 3-pack 140mm 2000 RPM CL-F138-PL14SW-A

SKU CH-DWGM-R4JH3 MPN CL-F138-PL14SW-A

Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic

Fan Size 140mm

Model SWAFAN

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

Swappable Blade Kit for RGB Builds

This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.

USB 2.0 Header Limits and Blade Swap Trade-offs

Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.

Hydraulic Bearing at 2000 RPM Peak

The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.

Pontos fortes

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

Especificações

BrandThermaltake
SeriesSWAFAN
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air FlowFan Blade 1 : 77.6 CFM (only one fan)
Fan Blade 2 : 71.3 CFM (only one fan)
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Peso de envio1.41 kg
Dimensões da embalagem185 × 183 × 150 mm

Outras versões deste modelo

Mais 3 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I install the standard or reverse blades for my front intake?

Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.

What does 2000 RPM actually deliver inside a case?

At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.

How does the USB 2.0 9-pin connector limit RGB control?

The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.