Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

Thermaltake

Thermaltake SWAFAN 14 RGB 3-pack 140mm 2000 RPM CL-F138-PL14SW-A

SKU CH-DWGM-R4JH3 MPN CL-F138-PL14SW-A

Three 140 mm fans with swappable blades for reversible airflow, hydraulic bearings, 500–2000 RPM and per-fan RGB rings totalling 30 addressable LEDs

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic

Fan Size 140mm

Model SWAFAN

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

Swappable Blade Kit for RGB Builds

This three-pack of 140 mm case fans includes three additional reverse blades so airflow direction can be changed without removing the LED rings. Each unit uses a hydraulic bearing and runs between 500 and 2000 RPM. The fans connect via USB 2.0 nine-pin headers and are finished in black with addressable RGB lighting.

USB 2.0 Header Limits and Blade Swap Trade-offs

Power and RGB control run through a single USB 2.0 nine-pin connector per fan, so the motherboard must supply enough headers or a compatible hub. Swapping the supplied reverse blades changes airflow from 77.6 CFM to 71.3 CFM per fan, a measurable drop when the alternative orientation is used.

Hydraulic Bearing at 2000 RPM Peak

The hydraulic bearing is rated for a maximum speed of 2000 RPM, which sets the upper bound for both noise and static pressure. Buyers who need higher sustained speeds or a different bearing technology should look elsewhere.

Öne çıkanlar

  • Swappable blades let you set airflow direction without losing RGB lighting
  • Three rings with 30 addressable LEDs give full per-fan colour control
  • Hydraulic bearing runs from 500 to 2000 RPM for quiet or high-performance cooling
  • Two blade profiles deliver 77.6 CFM or 71.3 CFM per fan for targeted airflow
  • USB 2.0 9-pin connector powers the pack and syncs with motherboard RGB software

Teknik özellikler

BrandThermaltake
SeriesSWAFAN
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air FlowFan Blade 1 : 77.6 CFM (only one fan)
Fan Blade 2 : 71.3 CFM (only one fan)
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorBlack
LEDRGB
Kargo ağırlığı1.41 kg
Koli boyutu185 × 183 × 150 mm

Bu modelin diğer sürümleri

Aynı seriden 3 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I install the standard or reverse blades for my front intake?

Use the standard blades for front intake; they push 77.6 CFM per fan at 2000 RPM, while the included reverse blades pull 71.3 CFM and are intended for exhaust or radiator pull configurations.

What does 2000 RPM actually deliver inside a case?

At 2000 RPM the standard blades move 77.6 CFM each, giving strong static pressure for radiators or restrictive mesh; the hydraulic bearing keeps noise lower than sleeve designs at that speed.

How does the USB 2.0 9-pin connector limit RGB control?

The 9-pin USB 2.0 header powers the included controller, which drives three addressable RGB rings with 30 LEDs total; software control requires a free internal USB 2.0 header on the motherboard.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.