BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Kingston Technology Corp.
16 GB DDR4 desktop memory running at 3200 MHz with CL22 latency and 1.2 V operation
This Kingston KCP432NS8/16 is a single 16GB DDR4 DIMM rated for 3200MHz operation at CL22 latency. It runs at the standard 1.20V and uses the 288-pin unbuffered form factor. The module supports Intel XMP 2.0 profiles for automatic configuration. It is built for desktop systems that accept DDR4 memory.
This module suits users adding 16GB of capacity to a compatible desktop platform. It works in boards that support DDR4 speeds up to 3200MHz and accept non-ECC unbuffered DIMMs. Systems requiring ECC error correction or registered memory cannot use this stick. Buyers needing lower-voltage or higher-density modules should look elsewhere.
The 3200MHz DDR4 rating is the single figure that determines fit. Your motherboard and processor must support this data rate for the module to run at its rated speed. If the platform only validates lower DDR4 speeds the memory will downclock accordingly. Verify the board's qualified vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KCP432NS8/16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Sendingarþyngd | 0.45 kg |
| Stærð sendingar | 145 × 41 × 5 mm |
The 1.20 V rating is the standard DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
A DDR4 memory slot that accepts 288-pin unbuffered non-ECC DIMMs is required; the board must also support 3200 MT/s or be willing to run the stick at a lower JEDEC speed.
The module includes an Intel XMP 2.0 profile for 3200 MT/s CL22; when mixed with slower DDR4 the system will typically drop all sticks to the lowest common JEDEC speed and loosest timings.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?