BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
Kingston Technology Corp.
16 GB DDR4 desktop memory running at 3200 MHz with CL22 latency and 1.2 V operation
This Kingston KCP432NS8/16 is a single 16GB DDR4 DIMM rated for 3200MHz operation at CL22 latency. It runs at the standard 1.20V and uses the 288-pin unbuffered form factor. The module supports Intel XMP 2.0 profiles for automatic configuration. It is built for desktop systems that accept DDR4 memory.
This module suits users adding 16GB of capacity to a compatible desktop platform. It works in boards that support DDR4 speeds up to 3200MHz and accept non-ECC unbuffered DIMMs. Systems requiring ECC error correction or registered memory cannot use this stick. Buyers needing lower-voltage or higher-density modules should look elsewhere.
The 3200MHz DDR4 rating is the single figure that determines fit. Your motherboard and processor must support this data rate for the module to run at its rated speed. If the platform only validates lower DDR4 speeds the memory will downclock accordingly. Verify the board's qualified vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KCP432NS8/16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Greutate la expediere | 0.45 kg |
| Dimensiunile coletului | 145 × 41 × 5 mm |
The 1.20 V rating is the standard DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
A DDR4 memory slot that accepts 288-pin unbuffered non-ECC DIMMs is required; the board must also support 3200 MT/s or be willing to run the stick at a lower JEDEC speed.
The module includes an Intel XMP 2.0 profile for 3200 MT/s CL22; when mixed with slower DDR4 the system will typically drop all sticks to the lowest common JEDEC speed and loosest timings.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?