BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
16 GB DDR4 desktop memory running at 3200 MHz with CL22 latency and 1.2 V operation
This Kingston KCP432NS8/16 is a single 16GB DDR4 DIMM rated for 3200MHz operation at CL22 latency. It runs at the standard 1.20V and uses the 288-pin unbuffered form factor. The module supports Intel XMP 2.0 profiles for automatic configuration. It is built for desktop systems that accept DDR4 memory.
This module suits users adding 16GB of capacity to a compatible desktop platform. It works in boards that support DDR4 speeds up to 3200MHz and accept non-ECC unbuffered DIMMs. Systems requiring ECC error correction or registered memory cannot use this stick. Buyers needing lower-voltage or higher-density modules should look elsewhere.
The 3200MHz DDR4 rating is the single figure that determines fit. Your motherboard and processor must support this data rate for the module to run at its rated speed. If the platform only validates lower DDR4 speeds the memory will downclock accordingly. Verify the board's qualified vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KCP432NS8/16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| وزن الشحنة | 0.45 kg |
| أبعاد الطرد | 145 × 41 × 5 mm |
The 1.20 V rating is the standard DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
A DDR4 memory slot that accepts 288-pin unbuffered non-ECC DIMMs is required; the board must also support 3200 MT/s or be willing to run the stick at a lower JEDEC speed.
The module includes an Intel XMP 2.0 profile for 3200 MT/s CL22; when mixed with slower DDR4 the system will typically drop all sticks to the lowest common JEDEC speed and loosest timings.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟