Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
16 GB DDR4 desktop memory running at 3200 MHz with CL22 latency and 1.2 V operation
This Kingston KCP432NS8/16 is a single 16GB DDR4 DIMM rated for 3200MHz operation at CL22 latency. It runs at the standard 1.20V and uses the 288-pin unbuffered form factor. The module supports Intel XMP 2.0 profiles for automatic configuration. It is built for desktop systems that accept DDR4 memory.
This module suits users adding 16GB of capacity to a compatible desktop platform. It works in boards that support DDR4 speeds up to 3200MHz and accept non-ECC unbuffered DIMMs. Systems requiring ECC error correction or registered memory cannot use this stick. Buyers needing lower-voltage or higher-density modules should look elsewhere.
The 3200MHz DDR4 rating is the single figure that determines fit. Your motherboard and processor must support this data rate for the module to run at its rated speed. If the platform only validates lower DDR4 speeds the memory will downclock accordingly. Verify the board's qualified vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KCP432NS8/16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| Shipping weight | 0.45 kg |
| Package size | 145 × 41 × 5 mm |
The 1.20 V rating is the standard DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
A DDR4 memory slot that accepts 288-pin unbuffered non-ECC DIMMs is required; the board must also support 3200 MT/s or be willing to run the stick at a lower JEDEC speed.
The module includes an Intel XMP 2.0 profile for 3200 MT/s CL22; when mixed with slower DDR4 the system will typically drop all sticks to the lowest common JEDEC speed and loosest timings.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?