BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Kingston Technology Corp.
16 GB DDR4 desktop memory running at 3200 MHz with CL22 latency and 1.2 V operation
This Kingston KCP432NS8/16 is a single 16GB DDR4 DIMM rated for 3200MHz operation at CL22 latency. It runs at the standard 1.20V and uses the 288-pin unbuffered form factor. The module supports Intel XMP 2.0 profiles for automatic configuration. It is built for desktop systems that accept DDR4 memory.
This module suits users adding 16GB of capacity to a compatible desktop platform. It works in boards that support DDR4 speeds up to 3200MHz and accept non-ECC unbuffered DIMMs. Systems requiring ECC error correction or registered memory cannot use this stick. Buyers needing lower-voltage or higher-density modules should look elsewhere.
The 3200MHz DDR4 rating is the single figure that determines fit. Your motherboard and processor must support this data rate for the module to run at its rated speed. If the platform only validates lower DDR4 speeds the memory will downclock accordingly. Verify the board's qualified vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KCP432NS8/16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Heat Spreader | No |
| משקל משלוח | 0.45 kg |
| מידות האריזה | 145 × 41 × 5 mm |
The 1.20 V rating is the standard DDR4 voltage, so power draw and heat stay within normal JEDEC limits for continuous operation.
A DDR4 memory slot that accepts 288-pin unbuffered non-ECC DIMMs is required; the board must also support 3200 MT/s or be willing to run the stick at a lower JEDEC speed.
The module includes an Intel XMP 2.0 profile for 3200 MT/s CL22; when mixed with slower DDR4 the system will typically drop all sticks to the lowest common JEDEC speed and loosest timings.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?