NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Replace Power
ATX 420W unit with one 80mm fan, switchable 110V or 220V input, and SATA, 20-pin or 24-pin ATX, plus 12V connectors
This 420 W ATX unit from Replace Power is built as a direct swap for Gateway 102015, 102544, 500GR, 503GR, 504GR, 506GR, 508GE and 550GR desktops. It also fits HP, Dell, Compaq and other common systems that use standard ATX mounting. The grey chassis weighs 0.1 kg and includes a single cooling fan.
A switchable 110 V / 220 V input lets the supply work on either mains voltage. Cooling is handled by an 80 mm fan. Cabling provides one 15-inch SATA connector, one 14-inch ATX connector that supports both 20-pin and 24-pin motherboard headers, and one 14-inch 12 V ATX connector. The standard ATX form factor means it drops into existing screw holes without modification.
The unit replaces a faulty or under-powered factory PSU in the listed Gateway models and compatible OEM desktops. The jump is worth it when the original supply has failed, when a newer graphics card or additional drives demand more than the old unit could deliver, or when a noisy fan signals end of life.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-73 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
The RPSU-C99-73 has a manual 110V/220V selector switch on the rear. Set it to match your local mains voltage before plugging the unit in.
It ships with a 14-inch ATX cable that fits both 20-pin and 24-pin motherboard headers.
Seat the 20/24-pin ATX connector firmly into the motherboard before attaching the 12V and SATA leads; skipping this step leaves the board unpowered.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?