NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
128 GB DDR4-2933 ECC registered quad-rank RDIMM for Supermicro servers
This 128GB registered DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It uses a 4Rx4 quad-rank layout built on Samsung 3DS/TSV chips and carries Supermicro certification for validated server platforms.
Registered ECC RDIMMs require a chipset and CPU that support registered signalling and error correction; consumer desktop boards will not POST with them. The 4Rx4 quad-rank organisation increases electrical load per slot, so the maximum number of modules per channel is often lower than with single or dual-rank DIMMs.
Confirm that your motherboard or server qualified vendor list includes the MEM-DR412MH-ER29 part number and supports 128GB quad-rank RDIMMs at 2933MHz. Check the maximum supported capacity per slot and total system capacity, as some platforms cap registered DIMM density below 128GB. Ensure the BIOS revision in use recognises Samsung 3DS/TSV modules.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR412MH-ER29 |
| Capacity | 128GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2S2Rx4 (4Rx4) |
| Chipset | Samsung Chipset |
| Features | Supermicro Certified MEM-DR412MH-ER29 (M393AAG40M3B-CYF) |
This module provides 128GB in a single 288-pin RDIMM using 3DS/TSV technology with a 2S2Rx4 (4Rx4) organisation. Select it when your server board supports quad-rank registered DIMMs and you need maximum density per slot.
The module runs at DDR4 2933 (PC4-23400) with CL21 latency at 1.20V, giving 23400 MB/s peak bandwidth per stick when the platform enables that data rate.
The registered ECC interface adds one clock cycle of buffering for signal integrity, allowing dense 4Rx4 loads on 288-pin DDR4 server boards while maintaining the 2933 MHz specification.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?