Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR4 ECC UDIMM modules with gold contacts and black chips on a light surface

A-Tech

A-Tech 16GB (4x4GB) DDR4 2133 ECC UDIMM CL15 1Rx8 1.2V 288-Pin Server RAM

SKU CH-943Z-V6796

16 GB kit of four 4 GB DDR4 2133 MHz ECC UDIMM modules with CL15 latency for servers and workstations

  • CAS LatencyCL15
  • Rank1Rx8
  • 16 GB kit of four 4 GB modules expands server capacity
  • DDR4 2133 MHz CL15 timing accelerates data access
  • ECC unbuffered UDIMM detects and corrects memory errors
  • Single-rank 1Rx8 organisation simplifies channel population
  • 2 V standard voltage reduces power draw

16GB DDR4 ECC UDIMM kit

This A-Tech kit provides 16GB of DDR4 ECC unbuffered memory across four 4GB modules. It is built for servers and workstations that require error-correcting code support and 288-pin DIMM slots. The modules run at 2133 MHz with a CAS latency of 15 and operate at the standard 1.2V voltage. Each module uses a single-rank 1Rx8 organisation.

Suited for ECC-capable servers and workstations only

The kit suits administrators upgrading compatible DDR4 servers or workstations that accept unbuffered ECC UDIMMs. It is not suitable for desktop or laptop computers, which cannot use ECC unbuffered memory. Buyers who need non-ECC memory or higher-capacity modules should look elsewhere.

Straightforward DIMM installation with channel rules

Installation follows standard 288-pin DIMM seating in the correct memory channels as specified by the system manual. The most common issue is installing these modules in a desktop or laptop, which will not recognise the ECC unbuffered format. Verifying the platform's qualified vendor list before purchase prevents compatibility problems.

Punti di forza

  • 16 GB kit of four 4 GB modules expands server capacity
  • DDR4 2133 MHz CL15 timing accelerates data access
  • ECC unbuffered UDIMM detects and corrects memory errors
  • Single-rank 1Rx8 organisation simplifies channel population
  • 2 V standard voltage reduces power draw

Caratteristiche tecniche

CAS LatencyCL15
Rank1Rx8

Domande su questo articolo

Does my motherboard need 288-pin DDR4 slots that support ECC unbuffered UDIMM modules?

Yes, this kit requires a server or workstation motherboard with 288-pin DDR4 slots that accept ECC unbuffered UDIMM modules; it will not work in standard desktop or laptop boards.

Can I mix these 2133 MHz CL15 1Rx8 modules with existing slower or higher-latency ECC UDIMM sticks?

The system will run all modules at the speed and timings of the slowest installed kit, so mixing is possible but overall memory performance will drop to the lowest common denominator.

How can I confirm the kit is running at 2133 MHz with CL15 timings and ECC active after installation?

Check the BIOS memory information screen or use a tool such as CPU-Z to verify the reported speed of 2133 MHz, CAS latency of 15, and that ECC status shows enabled.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.