EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16 GB DDR4 2400 SO-DIMM laptop memory upgrade with CL17 timing and 1.2 V operation
This 16GB DDR4 2400 CL17 module fits 260-pin SO-DIMM slots in notebooks and all-in-one systems. It operates at the standard 1.2V DDR4 voltage and uses unbuffered, non-ECC architecture with major-brand chips. The single stick provides a straightforward capacity increase for compatible machines.
Buyers whose platform requires ECC or registered memory cannot use this unbuffered non-ECC module. Desktop builders needing 288-pin DIMMs should look elsewhere, as the 260-pin form factor is physically incompatible with desktop motherboards. Systems limited to lower DDR4 speeds will still run the module at the highest supported frequency.
The 260-pin SO-DIMM keying and notch position determine whether the module seats correctly in the laptop slot. Verify the manufacturer's memory specifications list DDR4 2400 SO-DIMM support before ordering to ensure mechanical and electrical compatibility.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module is a 260-pin DDR4 SO-DIMM, the standard form factor for laptops that use DDR4 memory. Verify your system manual or manufacturer specifications to confirm it accepts 260-pin DDR4 SO-DIMMs before purchasing.
The module operates at the standard DDR4 voltage of 1.2 V and runs at 2400 MHz with CL17 latency. If your current memory is also DDR4, the system will typically run all modules at the speed and timings of the slowest stick.
After installing the module, open Task Manager (Performance > Memory) or use a tool such as CPU-Z to verify the reported speed shows 2400 MHz and the total capacity reflects the added 16 GB.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?