OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16GB DDR4 2400 SODIMM upgrades select 21.5 and 27-inch iMacs from 2017 and 2019
This 16GB DDR4 SODIMM is built for Apple iMac models from Mid 2017 and 2019, including the 21.5-inch 4K and 27-inch 5K configurations. It matches the factory DDR4 2400 specification so the system recognises it immediately without firmware changes. The module suits owners who want a single-stick upgrade to the maximum supported slot capacity.
The module operates at the standard DDR4 voltage of 1.20V and is unbuffered non-ECC, so it draws the same power as the original memory. No heat spreader is fitted, keeping the profile low enough for the tight SODIMM slots in these iMacs. Under normal workloads the memory runs silently and adds no measurable thermal load to the compact enclosure.
The kit provides one 16GB stick organised as 2Rx8, running at DDR4 2400 (PC4-19200) with 260 pins. This density and rank configuration is the specific requirement for the compatible iMac models listed. Buyers needing ECC, registered DIMMs, or a different speed or voltage will not be able to use this module.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Apple Mac RAM Memory Upgrades |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Power off and unplug the iMac, lay it screen-down on a soft cloth, remove the memory access door with a Phillips screwdriver, eject any existing modules by pushing the side levers outward, align the 260-pin notch on the new module, press firmly until the levers click back, then replace the door before reconnecting power.
No scheduled maintenance is required; the unbuffered non-ECC DDR4 SODIMM has no moving parts or batteries, so it typically lasts the life of the iMac unless a rare defect appears, in which case the lifetime warranty covers replacement.
The 2400 MHz DDR4 speed and 1.20 V voltage set the bandwidth ceiling, so prolonged maximum throughput tasks will hit the module's rated transfer rate before thermal throttling becomes a factor.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?