NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16GB DDR4 2400MHz ECC registered DIMM for server and workstation upgrades
This 16GB DDR4 2400MHz ECC registered DIMM is built for server and workstation systems that require error-correcting memory. It operates at 1.2V with a CAS latency of CL17 and uses a 1Rx4 rank configuration on a 288-pin form factor. The module is a direct replacement for specific Hynix part numbers.
The registered buffer reduces electrical load on the memory controller, allowing stable operation in multi-module configurations. ECC detects and corrects single-bit errors, preventing data corruption in critical workloads. Major brand chips are used throughout, and every module undergoes quality assurance testing before shipment.
A single 16GB module provides headroom for running multiple virtual machines, hosting databases, or processing large datasets in memory. Systems with limited DIMM slots benefit from the high density per module. Workloads that exceed 16GB per channel or require higher bandwidth than PC4-19200 will need additional modules or a faster memory tier.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module uses the standard 288-pin DDR4 DIMM form factor and operates at 1.2V, so it fits any DDR4 RDIMM slot without extra firmware.
Sustained throughput is capped by the DDR4-2400 data rate and CL17 latency, which set the maximum bandwidth ceiling under heavy load.
At the standard 1.2V DDR4 voltage the module draws minimal power and produces low heat, typical for registered ECC DIMMs in server environments.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?