Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR4 2933MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-VGZ3-DP533

16 GB DDR4 2933 MHz ECC registered server DIMM with CL21 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 architecture
  • 2933 MHz speed accelerates server workloads through PC4-23400 bandwidth
  • 16 GB capacity expands memory headroom for demanding applications
  • 2 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases density within 288-pin form factor

16GB DDR4 ECC RDIMM for Servers

This module delivers 16GB of DDR4 2933MHz registered ECC memory for server and workstation platforms. It operates at 1.20V with CL21 latency and uses a 2Rx8 organisation. The 288-pin DIMM is built as a compatible replacement for Micron MTA18ASF2G72PDZ-2G9E1 and MTA18ASF2G72PDZ-2G9J3 part numbers.

Registered DIMM limits and platform rules

Registered ECC RDIMMs place an electrical load on the memory controller that unbuffered modules do not. The platform must explicitly support registered ECC memory; consumer desktop chipsets and many laptop sockets will not initialise this module. Mixing registered with unbuffered DIMMs in the same channel is not supported by any DDR4 platform.

Verify memory controller and slot layout

Confirm that your system board or processor memory controller lists DDR4 2933MHz registered ECC RDIMM support and provides 288-pin DIMM slots. Check the maximum per-slot capacity and total channel population limits in the vendor documentation before ordering. The module uses Micron chipset components and follows the PC4-23400 standard.

Punti di forza

  • ECC protection guards data integrity with registered DDR4 architecture
  • 2933 MHz speed accelerates server workloads through PC4-23400 bandwidth
  • 16 GB capacity expands memory headroom for demanding applications
  • 2 V operation reduces power draw per module
  • 2Rx8 dual-rank layout increases density within 288-pin form factor

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA18ASF2G72PDZ-2G9E1, MTA18ASF2G72PDZ-2G9J3
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMTA18ASF2G72PDZ-2G9E1, MTA18ASF2G72PDZ-2G9J3

Domande su questo articolo

Should I choose the 16GB module or a different capacity for my server upgrade?

This listing is for a single 16GB DDR4 2933MHz ECC RDIMM. Select this module when your system requires exactly 16GB per slot or when populating empty DIMM slots in 16GB increments.

What does the 2933MHz speed mean for actual server workloads?

The module runs at 2933 MT/s with CL21 latency and 1.20V, delivering the standard DDR4-2933 data rate for compatible server and workstation platforms.

How does the PC4-23400 rating and registered ECC design affect compatibility?

PC4-23400 is the industry designation for DDR4-2933 bandwidth. The 2Rx8 registered ECC DIMM uses 288 pins and requires a platform that supports registered memory with error correction.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.