Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green bare circuit board with black memory chips and gold edge contacts

A-Tech

A-Tech 16GB DDR5 4800 ECC UDIMM 1Rx8 for Hynix HMCG78AEBEA084N server RAM

SKU CH-TC59-W93CG

A 16 GB DDR5 ECC UDIMM running at 4800 MHz with CL40 latency and 1.10 V for server workloads

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 16GB DDR5-4800 ECC UDIMM for reliable server workloads
  • 1Rx8 single-rank layout keeps latency low at CL40
  • 10V standard voltage reduces power draw per module
  • 288-pin DDR5 form factor fits compatible server boards
  • Major-brand DRAM ICs tested for dependable operation

Capacity and form factor

This A-Tech module provides 16GB of DDR5 memory in a 288-pin UDIMM form factor. It operates at 4800MHz with a CAS latency of 40 and runs at the standard 1.10V. The kit is an unbuffered, single-rank 1Rx8 design with on-die ECC for data integrity.

Who this suits

Builders upgrading or repairing servers and workstations that specifically require DDR5 4800 unbuffered ECC UDIMMs will find this module a direct fit. It is not for systems that need registered or load-reduced DIMMs, nor for boards that only accept non-ECC memory.

Deciding specification

The critical match is the 1Rx8 rank and chip organisation combined with unbuffered ECC operation at 1.10V. Verify that your platform supports this exact configuration before ordering, as registered or differently ranked modules will not function correctly.

Punti di forza

  • 16GB DDR5-4800 ECC UDIMM for reliable server workloads
  • 1Rx8 single-rank layout keeps latency low at CL40
  • 10V standard voltage reduces power draw per module
  • 288-pin DDR5 form factor fits compatible server boards
  • Major-brand DRAM ICs tested for dependable operation

Caratteristiche tecniche

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG78AEBEA084N
ModelA-Tech 16GB DDR5-4800 ECC UDIMM Server RAM Module
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Domande su questo articolo

How does the 1Rx8 rank configuration affect sustained throughput on this DDR5 4800 module?

The single-rank 1Rx8 layout keeps all 16 GB on one rank, allowing the memory controller to access the full capacity without rank-to-rank switching delays during long workloads.

What thermal and acoustic impact should I expect when this unbuffered ECC UDIMM runs continuously at 1.10 V?

With no heat spreader and standard 1.10 V DDR5 voltage, the module relies on case airflow; it adds minimal heat and produces no audible noise of its own.

Which motherboard slot and firmware features are required for this 288-pin DDR5 ECC UDIMM to operate?

You need a DDR5-compatible motherboard with a 288-pin UDIMM slot and BIOS support for ECC on unbuffered memory.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.