NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
4GB DDR3 1333MHz ECC UDIMM server memory with CL9 latency and 1.5V operation
This 4GB DDR3 1333MHz PC3-10600 ECC UDIMM module is built for server and workstation systems that require error-correcting unbuffered memory. It suits administrators who need to replace or expand memory in compatible platforms without changing voltage or form factor.
The module is validated as a direct equivalent for six Kingston part numbers including KTD-PE313E/4G and KVR1333D3E9S/4G, so it fits existing qualified memory lists without additional qualification steps. Major-brand chips and CL9 latency at 1.5V maintain the same electrical and timing profile as the original parts.
Installation follows the standard 240-pin DDR3 DIMM procedure: align the key notch, press firmly until the retention clips engage, and verify detection in BIOS. The most common issue is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module is built with major-brand DDR3 chips tested to A-Tech quality standards and carries a lifetime warranty, so no scheduled chip replacement is required under normal server workloads.
Sustained operation at the rated 1333MHz speed and CL9 latency is the design target; the first practical limit is the system memory controller’s maximum supported capacity and rank population rules.
At the standard 1.50V DDR3 voltage the module draws nominal power for a 4GB unbuffered ECC DIMM, generating typical DDR3 heat levels that standard server airflow handles without extra cooling.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?