Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

A-Tech

A-Tech 64GB (4x16GB) DDR4 3200 ECC UDIMM CL22 1Rx8 1.2V 288-Pin Server RAM

SKU CH-8X9W-YB05X

Four 16 GB DDR4 3200 ECC UDIMM modules with CL22 latency, 1Rx8 rank and 1.2 V operation for servers and workstations

  • CAS LatencyCL22
  • Rank1Rx8
  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR4 3200 MHz speed rated at PC4-25600 for fast data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • Single-rank 1Rx8 organisation at CL22 latency for efficient memory access
  • Standard 1.2 V DDR4 voltage on 288-pin UDIMM form factor

64GB ECC UDIMM kit for servers

This A-Tech kit delivers 64 GB of DDR4 3200 ECC unbuffered memory across four 16 GB modules. It is built for servers and workstations that require error-correcting UDIMMs and is not compatible with desktop or laptop computers.

1.2V standard voltage operation

Each module runs at the DDR4 standard 1.2 V with a CL22 latency and single-rank 1Rx8 organisation. The kit conforms to PC4-25600 specifications for typical server workloads.

Lifetime warranty and US-based support

A-Tech backs every order with a lifetime warranty and provides complimentary United States based technical support before, during and after purchase. All modules undergo quality assurance testing for dependable performance.

Punti di forza

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR4 3200 MHz speed rated at PC4-25600 for fast data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • Single-rank 1Rx8 organisation at CL22 latency for efficient memory access
  • Standard 1.2 V DDR4 voltage on 288-pin UDIMM form factor

Caratteristiche tecniche

CAS LatencyCL22
Rank1Rx8

Domande su questo articolo

How do I install the four 288-pin UDIMM modules and what step is often missed?

Power off the server, open the chassis, align each module notch with the slot key, press firmly until both retention clips click, then verify in BIOS that all 64 GB are detected at 3200 MHz; the step most often missed is seating every module fully so both clips engage.

What maintenance or replacement will this 1.2 V DDR4 ECC kit need over time?

No scheduled maintenance is required; keep air intakes clean so the modules stay cool, and replace a stick only if the system logs an uncorrectable ECC error or fails to recognise the 16 GB capacity during POST.

What limit appears first when the 1Rx8 CL22 memory runs under sustained heavy load?

The CAS latency of CL22 at 3200 MHz sets the timing ceiling; under continuous bandwidth-heavy workloads the fixed 22-cycle access delay becomes the bottleneck before thermal throttling on these 1.2 V single-rank modules.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.