Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR3 ECC UDIMM sticks, 240-pin, matte black chips

A-Tech

A-Tech 8GB (2x4GB) DDR3 1866 ECC UDIMM 1Rx8 1.5V server RAM

SKU CH-J1N2-TSWYS

An 8 GB dual-channel DDR3 1866 kit with ECC unbuffered DIMMs for servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • 8GB dual-channel kit expands server memory capacity
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Single-rank 1Rx8 organisation improves signal integrity
  • 5 V standard voltage ensures broad platform compatibility

Server DDR3 ECC UDIMM kit

This A-Tech kit supplies 8 GB of DDR3 1866 memory in two 4 GB unbuffered ECC UDIMMs. Each module runs at 1.5 V with CL13 latency and uses a single-rank 1Rx8 organisation on a 240-pin DIMM. The kit is built for dual-channel servers and workstations that require error-correcting memory.

For DDR3 ECC unbuffered platforms only

It suits administrators upgrading or repairing servers and workstations that specifically accept DDR3 ECC UDIMM modules. Buyers whose systems need registered DIMMs, non-ECC memory, or a different DDR generation cannot use this kit. Always confirm the motherboard’s qualified-vendor list before ordering.

DDR3 1866 ECC unbuffered specification

The decisive figure is the DDR3 1866 ECC UDIMM rating at 1.5 V with CL13 timing. If the platform demands DDR3 ECC unbuffered DIMMs at this speed and voltage, the kit will fit; if it requires registered ECC, a different voltage, or another memory generation, it will not.

Punti di forza

  • 8GB dual-channel kit expands server memory capacity
  • 1866 MHz DDR3 speed accelerates data throughput
  • ECC unbuffered design detects and corrects memory errors
  • Single-rank 1Rx8 organisation improves signal integrity
  • 5 V standard voltage ensures broad platform compatibility

Caratteristiche tecniche

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC3-14900E
Capacity8GB (2 x 4GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Does this kit need a motherboard that takes DDR3 ECC unbuffered 240-pin DIMMs?

Yes, it is built for servers and workstations that accept DDR3 ECC UDIMM modules in 240-pin slots and will not fit desktop or laptop boards.

Will these 1.50 V modules run alongside older 1.5 V DDR3 DIMMs I already have?

They operate at the same 1.50 V standard voltage, so they can share a channel with other 1.5 V DDR3 sticks if the platform supports mixed ranks.

How can I confirm the kit is running at 1866 MHz with CL13 after installation?

Check the memory speed and latency in the BIOS or a system-info tool such as CPU-Z; they should show 1866 MHz and CL13 timings.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.