Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 288-pin DDR4 DIMM module with black chips

A-Tech

A-Tech 8GB DDR4 2400MHz PC4-19200 Desktop RAM

SKU CH-W19R-TMGJV

8GB DDR4 2400MHz desktop memory module with 288-pin DIMM form factor and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 8GB capacity lets you run more applications at once
  • DDR4 2400MHz speed rated at PC4-19200 for responsive performance
  • 20V standard DDR4 voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible desktop motherboards
  • Non-ECC unbuffered design suited for mainstream desktop use

8GB DDR4 2400MHz Desktop Upgrade

This single 8GB DDR4 module runs at 2400MHz with a standard 1.20V operating voltage. It uses the 288-pin DIMM form factor and is built as a non-ECC unbuffered unit. The stick is designed as a direct replacement for the Hynix HMA41GU6AFR8N-UH module in compatible desktop systems.

Replacing Slower DDR4 or Adding Capacity

Swapping out lower-frequency DDR4 memory or filling an empty slot with this 2400MHz module can improve multitasking headroom and reduce load times. The upgrade is worthwhile when the motherboard and CPU memory controller officially support DDR4 2400 operation without downclocking to a lower speed.

DDR4 2400 Interface Limits

The DDR4 2400 standard caps data transfer at the PC4-19200 rate, so this module cannot exceed that bandwidth regardless of tighter timings. Systems limited to lower DDR4 speeds will automatically downclock the stick, while platforms requiring registered or ECC memory cannot use this unbuffered non-ECC design at all.

Punti di forza

  • 8GB capacity lets you run more applications at once
  • DDR4 2400MHz speed rated at PC4-19200 for responsive performance
  • 20V standard DDR4 voltage keeps power draw low
  • 288-pin DIMM form factor fits compatible desktop motherboards
  • Non-ECC unbuffered design suited for mainstream desktop use

Caratteristiche tecniche

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Domande su questo articolo

Will this 288-pin DDR4 DIMM fit my motherboard's memory slots?

The module uses the standard 288-pin DDR4 DIMM form factor, which matches any desktop motherboard with DDR4 slots.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, press down firmly until both side clips click into place, and verify the module sits level; the step often missed is fully engaging both clips.

Does this 1.20V unbuffered non-ECC module need any firmware updates or periodic replacement?

No firmware updates are required for memory modules; it is a passive component with no moving parts and does not need scheduled replacement under normal use.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.