Alphacool HF Quick Disconnect Fitting 20mm TPV 12.7/6.7mm

Enterprise-grade quick disconnect for TPV tubing

The Alphacool HF Quick Disconnect Fitting is built from the Enterprise Solutions range specifically for Alphacool TPV hoses. It targets builders who need a secure, leak-proof link in server or workstation loops. The push-in design uses an internal locking ring that engages the hose wall, delivering high tensile strength so the tube cannot be pulled off under normal loads. Buyers who require a fitting for standard soft tubing sizes other than 12.7/6.7 mm cannot use this part.

Sustained-load behaviour with locking ring engaged

Under continuous pressure the locking ring maintains its grip on the TPV hose, preventing separation caused by vibration or thermal cycling. The compact 20 mm outer diameter reduces bulk in dense server chassis compared with common connectors that exceed 24 mm. Low mass minimises mechanical stress on adjacent components during long-term operation. The fitting is not designed for rapid, repeated connect-disconnect cycles in a test-bench workflow.

12.7/6.7 mm TPV hose compatibility decides fit

The single specification that determines whether this component works in your loop is the tube size: 12.7 mm outer diameter and 6.7 mm inner diameter. Only Alphacool TPV hoses with those exact dimensions will seat correctly in the push-in mechanism and engage the locking ring. Any other hose profile will not achieve the rated tensile strength or leak-proof seal. The overall fitting height is 104 mm.