Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Alphacool
Slim 120 mm PWM fan spins 600–1800 rpm with double ball bearings for quiet liquid-cooling radiators
The Alphacool SL-15 is a 120 x 120 x 15 mm fan with 4-pin PWM control and a 600–1800 rpm range. It is built for liquid-cooling radiators in servers and workstations where space is limited. The black frame suits low-profile builds that need precise speed regulation.
Double ball bearings keep vibration low and service life high during continuous operation at full speed. Protection circuits stop the motor automatically if the blades are blocked, preventing damage in dense rack environments. Soft-start reduces mechanical stress on every spin-up cycle.
This fan replaces 3-pin or voltage-controlled 120 mm units that cannot reach zero rpm or offer the same bearing durability. The jump is worth it when a server mainboard supports 4-pin PWM and the chassis accepts a 15 mm thickness. Builders needing 25 mm frames or higher static pressure must look elsewhere.
| Brand | Alphacool |
|---|---|
| Model | 4250197248297 |
| Color | Black |
| Features | The Alphacool ES fans have been specially developed for use in servers and workstations and, unlike usual, do not offer a 2 or 3-pin DC power connection, but a 4-pin PWM control. |
The fan spins between 600 and 1800 rpm using a double ball bearing for smooth, low-vibration operation; its 4-pin PWM control lets the motherboard lower speed under light load, reducing both noise and power draw over a full day.
A standard 4-pin PWM header supplying 12 V is needed; the fan receives full voltage at all times and is regulated by the PWM signal, so a 3-pin DC header will not provide speed control.
Yes — the SL-15 uses the common 120 mm square frame and 15 mm thickness, while your 80 mm fans occupy the smaller 80 x 80 x 25 mm footprint, so both can coexist if the case has mounting points for each size.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?