Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Clear PETG tube 12mm outer diameter 1000mm length

Bitspower

Bitspower BP-NCPLT12-L1000 PETG tubing 12mm OD 1000mm clear

SKU CH-36PP-JYKX9 MPN BP-NCPLT12-L1000

Clear PETG tubing with 12mm outer diameter and 1000mm length, designed for Bitspower EML fittings

  • TypeTubing
  • PETG link tubing resists cracking with durable material strength
  • 12 mm outer diameter fits Bitspower EML series fittings
  • 1000 mm length gives full loop routing flexibility
  • Clear PETG shows coolant colour without distortion
  • Designed specifically for Bitspower EML fittings only

Crystal Link Tubing 12 mm

Bitspower Crystal Link Tubing is rigid PETG pipe with a 12 mm outer diameter and a 1000 mm length. The clear material shows coolant colour and flow. It is made for custom liquid-cooling loops that use hard-line tubing. Builders who want a transparent, structural run choose this tube.

Replaces soft tubing runs

Soft tubing can kink, cloud or plasticise over time; this PETG link tube removes those failure points. The jump is worth it when a build demands fixed geometry, long straight spans or a cleaner aesthetic. It is not for loops that need tight bends without angled fittings.

One metre straight length

A single 1000 mm piece covers most motherboard-tray-to-radiator or reservoir-to-pump runs in mid-tower cases. Two pieces handle a CPU-plus-GPU loop with a top radiator. Builds with multiple radiators or external distribution plates will need additional lengths.

Punti di forza

  • PETG link tubing resists cracking with durable material strength
  • 12 mm outer diameter fits Bitspower EML series fittings
  • 1000 mm length gives full loop routing flexibility
  • Clear PETG shows coolant colour without distortion
  • Designed specifically for Bitspower EML fittings only

Caratteristiche tecniche

TypeTubing

Domande su questo articolo

Which fittings are required for the 12 mm OD PETG tubing?

Use Bitspower EML series fittings; the tubing is designed for that specific fitting line only.

What is the correct way to cut and seat the 1000 mm PETG tube?

Cut square with a fine-tooth saw, deburr the edge, then push fully into the EML fitting until the tube bottoms out against the internal stop.

When should the clear PETG tube be replaced in a custom loop?

Replace if the tube turns yellow, clouds, stiffens or shows micro-cracks — typically after one to two years depending on coolant and temperature.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.