NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Brute Networks
Dell-compatible 16 GB DDR4-3200 UDIMM with 2Rx8 layout and 1.2 V operation
This 16 GB DDR4-3200 module is built to Dell part number C5N22 specifications. It fits 288-pin UDIMM slots in compatible Dell PowerEdge servers and workstations. The 2Rx8 organisation and 1.2 V operation match the original OEM configuration. It is intended for administrators upgrading or repairing supported Dell systems.
The module runs continuously at 3200 MT/s with a PC4-25600 bandwidth rating. Unbuffered, non-ECC operation means data moves directly to the memory controller without register latency. Major-brand DRAM chips from Samsung, SK Hynix or Micron provide consistent timing under sustained workloads. Identical modules ship together to preserve dual-channel or multi-channel performance.
Confirm the target platform accepts 288-pin DDR4 UDIMMs at 1.2 V before ordering. The system must support non-ECC, unbuffered memory in a 2Rx8 layout. Check the server or workstation manual for maximum per-slot capacity and total population rules. Mixed voltages or registered DIMMs will not operate in the same channel.
| Brand | Dell |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
The module operates at 1.20 volts, the standard voltage for DDR4-3200 UDIMMs, so power draw stays at the JEDEC baseline for this speed and density.
You need a DDR4 UDIMM slot with a 288-pin connector and a memory controller that supports non-ECC unbuffered modules at PC4-25600.
It can run with other DDR4 UDIMMs, but the system will clock all modules to the lowest common speed and voltage.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?