Computer Memory Solutions
Computer Memory Solutions 32GB (2x16GB) DDR4 2400MHz CL17 Non-ECC DIMM - C114
32 GB kit of two 16 GB DDR4 2400 MHz CL17 DIMMs for HP ProDesk 400 G3 and 400 G4 desktops
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 32 GB total capacity from a matched 2 x 16 GB kit
- DDR4 2400 MHz speed rated at PC4 19200 bandwidth
- CL17 latency with 17-17-17 timings at 1.2 V
- Unbuffered non-ECC 288-pin DIMM modules using major-brand chips
- Guaranteed compatible with HP ProDesk 400 G3 and G4 SFF/MT systems
32GB DDR4 Kit for HP Prodesk 400 G3/G4
This 32GB kit contains two 16GB DDR4 2400MHz modules built for HP Prodesk 400 G3 Microtower, G3 Small Form Factor and G4 SFF/MT systems. It uses non-ECC unbuffered DIMMs with CL17 timings at 1.2V. The kit targets owners of these specific HP desktops who need to reach the platform’s 32GB maximum across two sockets.
Steady throughput at DDR4 2400 speeds
Running at PC4 19200 with 17-17-17 latency, the modules deliver consistent bandwidth during extended workloads rather than brief bursts. The 2Rx8 organisation and major-brand chipset maintain stable signalling across both sticks. Builders who need error correction or registered memory cannot use this kit.
Low-voltage operation without a heat spreader
The 1.2V rating keeps power draw modest inside the compact Prodesk chassis. No heat spreader is fitted, so airflow from the system fan passes directly over the chips. Buyers who want RGB lighting or tall heat sinks for overclocking headroom should look elsewhere.
Punti di forza
- 32 GB total capacity from a matched 2 x 16 GB kit
- DDR4 2400 MHz speed rated at PC4 19200 bandwidth
- CL17 latency with 17-17-17 timings at 1.2 V
- Unbuffered non-ECC 288-pin DIMM modules using major-brand chips
- Guaranteed compatible with HP ProDesk 400 G3 and G4 SFF/MT systems
Caratteristiche tecniche
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq Prodesk 400 G3 Microtower PC, 400 G3 Small Form Factor PC, 400 G4 SFF/MT PC |
| Package Content | 2 Memory RAM Sticks |
Domande su questo articolo
Does the 1.2 V DDR4 kit run cool enough for all-day operation inside a compact ProDesk 400 G3 SFF?
The modules operate at the standard 1.2 V DDR4 voltage and have no heat spreader, so they rely on the chassis airflow; the ProDesk 400 G3 SFF and MT designs are built to cool memory at this voltage during continuous use.
My ProDesk 400 G3 has two DIMM slots — will this 2 x 16 GB kit fill them completely?
Yes, the ProDesk 400 G3 and 400 G4 SFF/MT platforms each provide two 288-pin DDR4 slots, and this kit supplies two 16 GB sticks for a total of 32 GB, matching the documented maximum.
Can I keep one existing 16 GB stick and add a single module from this kit?
The kit is sold as a matched pair of 16 GB modules; using only one stick would leave the second slot empty and would not take advantage of the dual-channel design validated for these ProDesk models.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
NEMIX RAM DDR5 6400 ECC RDIMM 384GB 4x96GB CL52 1.1V 2Rx4 ASRock Rack TURIN2D16-2T/ROT memory upgrade
- 384GB (4 x 96GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM 1TB 8x128GB DDR5-6400 CL52 2Rx4 RDIMM Kit for ASRock Rack TURIN2D16-2T/ROT
- 1TB (8 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM 128GB DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Supermicro H14SST-G memory upgrade
- 128GB
- 288-Pin DDR5 RDIMM



