Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board SODIMM module with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3L 1600 SODIMM 1.35V CL11 memory upgrade

SKU CH-60CR-TN5TW

4GB DDR3L 1600 SODIMM module with CL11 timing and 1.35V operation for HP 2000 series notebooks

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 4GB DDR3L 1600MHz SODIMM boosts HP 2000 series responsiveness
  • 35V low-voltage DDR3L reduces power draw and heat
  • CL11 11-11-11 timing delivers stable 1600MHz operation
  • 204-pin unbuffered non-ECC design fits HP 2000-2D24Dx and 2000-2B20Ca
  • Single 4GB module supports dual-slot upgrade path to 8GB

4 GB DDR3L SODIMM for HP 2000 Series

This 4 GB DDR3L SO-DIMM runs at 1600 MHz with CL11 timing at 1.35 V. It is built for HP and Compaq 2000 Series notebooks including the 2000-2D24Dx and 2000-2B20Ca models. The module is unbuffered, non-ECC and uses a 1Rx8 rank configuration. It installs directly into a 204-pin slot without a heat spreader.

Voltage and speed match DDR3L 1600

The single specification that decides fit is the 1.35 V DDR3L 1600 (PC3L 12800) rating. A standard 1.5 V DDR3 module will not operate correctly in these notebooks. The CL11 11-11-11 timing and 1Rx8 organisation must match the system memory controller requirements. No other voltage or speed combination is supported by the target platforms.

Fits two-slot 2000 Series chassis

The notebooks provide two 204-pin SO-DIMM slots and support a maximum of 8 GB total. Adding this 4 GB stick leaves the second slot free for a matching module to reach the 8 GB limit. The upgrade requires no BIOS change and works with the existing DDR3-12800 or 10600 memory standard. Builders needing more than 8 GB or a different form factor cannot use this module.

Punti di forza

  • 4GB DDR3L 1600MHz SODIMM boosts HP 2000 series responsiveness
  • 35V low-voltage DDR3L reduces power draw and heat
  • CL11 11-11-11 timing delivers stable 1600MHz operation
  • 204-pin unbuffered non-ECC design fits HP 2000-2D24Dx and 2000-2B20Ca
  • Single 4GB module supports dual-slot upgrade path to 8GB

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM5126412800SOSRL
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq 2000 Series Notebook 2000-2D24Dx, 2000-2B20Ca
Package Content1 Memory RAM Stick

Domande su questo articolo

How much usable speed will I see from the 1600 MHz rating once this module is installed?

The module runs at DDR3L 1600 (PC3L 12800) with CL11 11-11-11 timings, so the notebook’s memory controller will operate it at up to 1600 MHz provided the platform supports that frequency.

What does the DDR3L 1.35 V standard cap in practice for this upgrade?

DDR3L at 1.35 V limits the module to 1.35 V operation; it will not run at the higher 1.5 V used by standard DDR3, and the notebook must support DDR3L to use this stick.

Will the 204-pin SODIMM fit the HP 2000 series notebook’s memory slot?

Yes — it is a 204-pin DDR3 SO-DIMM, the exact form factor used by the HP/Compaq 2000 Series notebooks listed, and the system has two such slots.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.