Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green circuit boards with black memory chips, no heat spreaders, 240-pin DDR3 DIMM form factor

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1600MHz CL11 DIMM - A74

SKU CH-4CVJ-6ZDEG

8 GB dual-channel DDR3 kit running at 1600 MHz CL11, validated for HP EliteDesk 800 G1 SFF and tower models

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 8GB dual-channel kit doubles throughput for EliteDesk 800 G1
  • 1600 MHz DDR3 matches system bus for stable operation
  • CL11 11-11-11 timing keeps latency low
  • 5 V unbuffered DIMM fits standard desktop slots
  • Compatible with HP part numbers E1Z83UT through E1Z94UT

Targeted DDR3 kit for HP EliteDesk 800 G1

This 8 GB kit contains two 4 GB unbuffered DDR3 DIMMs built for HP EliteDesk 800 G1 SFF and tower models. It uses major-brand chips at 1.5 V with a CAS latency of 11. The modules carry a limited lifetime warranty from Computer Memory Solutions.

Chipset limits speed to 1333 MHz

Although rated for 1600 MHz, the platform chipset forces operation at 1333 MHz. The system accepts a maximum of 32 GB across four sockets. A 64-bit operating system is required to address memory above 4 GB.

Simple two-stick installation

Insert both DIMMs into the available 240-pin slots; the kit is validated for the listed EliteDesk part numbers. Builders who need more than 32 GB total capacity or registered ECC modules must choose a different platform.

Punti di forza

  • 8GB dual-channel kit doubles throughput for EliteDesk 800 G1
  • 1600 MHz DDR3 matches system bus for stable operation
  • CL11 11-11-11 timing keeps latency low
  • 5 V unbuffered DIMM fits standard desktop slots
  • Compatible with HP part numbers E1Z83UT through E1Z94UT

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Elitedesk 800 G1 Series Sff/Tower Towers
Package Content2 Memory RAM Sticks

Domande su questo articolo

Should I buy the 8GB (2x4GB) kit or a single 8GB module for my EliteDesk 800 G1?

The EliteDesk 800 G1 has four DIMM slots and supports up to 32 GB. The 2x4GB kit leaves two slots free for future expansion, while a single 8GB stick would occupy one slot and give the same total capacity.

The module is rated 1600 MHz, but the spec sheet says memory runs at 1333 MHz. What speed will I actually see?

The chipset in the EliteDesk 800 G1 limits DDR3 to 1333 MHz, so the 1600 MHz modules will downclock to 1333 MHz once installed.

Is this DDR3 memory compatible with the 240-pin DIMM slots on my EliteDesk 800 G1 tower?

Yes. These are 240-pin DDR3 SDRAM DIMMs, non-ECC, unbuffered, 1.5 V, CL11, matching the EliteDesk 800 G1 SFF and tower memory specifications exactly.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.