Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green printed circuit board with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions CM128645300DIMMDR 1GB DDR2 667MHz DIMM memory upgrade

SKU CH-JEFT-DCVQW

A 1 GB DDR2 module rated at 667 MHz and 1.8 V for HP/Compaq dc5700 SFF and Microtower desktops

  • Capacity1GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 1GB capacity adds multitasking headroom for daily workloads
  • DDR2 667MHz speed matches HP dc5700 SFF and Microtower specifications
  • CL5 5-5-5 timing delivers stable desktop responsiveness
  • 240-pin unbuffered non-ECC design fits standard DIMM slots
  • 8V operation keeps power draw low for legacy systems

1GB DDR2-667 DIMM for HP dc5700

This 1GB DDR2-667 (PC2-5300) module is built for HP/Compaq Business Desktop dc5700 small-form-factor and microtower systems. It uses a 240-pin unbuffered non-ECC design running at 1.8V with CL5 5-5-5 timing. The single stick is suited for basic office workloads on supported legacy platforms.

Suitable for dc5700 upgrades.

Buyers restoring or expanding memory in an HP dc5700 SFF or microtower will find this module matches the factory specification. It is not intended for systems that require ECC error correction, registered buffering, or higher-capacity dual-rank configurations beyond the single 1GB rank provided here.

Verify DDR2 slot availability and 1.8V support

Before ordering, confirm the motherboard has a free 240-pin DDR2 DIMM slot and that the BIOS accepts 1.8V non-ECC modules at 667MHz. The dc5700 family includes several chassis variants, so check the exact model label to ensure the slot count and voltage match this stick.

Punti di forza

  • 1GB capacity adds multitasking headroom for daily workloads
  • DDR2 667MHz speed matches HP dc5700 SFF and Microtower specifications
  • CL5 5-5-5 timing delivers stable desktop responsiveness
  • 240-pin unbuffered non-ECC design fits standard DIMM slots
  • 8V operation keeps power draw low for legacy systems

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM128645300DIMMDR
Capacity1GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Desktop Dc5700 Sff/Microtower
Package Content1 Memory RAM Stick

Domande su questo articolo

Will this 240-pin DDR2 DIMM fit in my HP dc5700 SFF or Microtower?

Yes, the module is listed as compatible with the HP/Compaq Business Desktop dc5700 SFF/Microtower and other dc5700, dc7600, dc7700, dc7800 and dx2255 models.

Can I run this PC2-5300 stick alongside older PC2-533MHz memory in the same system?

The system will operate all modules at the lowest common speed, so adding this 667MHz DIMM to existing 533MHz memory will result in both running at 533MHz.

How can I verify the module is running at 667MHz with CL5 timings after installation?

Check the memory speed and timings in the BIOS setup or use a system information tool such as CPU-Z to confirm DDR2-667 operation at 5-5-5 latency.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.