Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

Computer Memory Solutions

Computer Memory Solutions CM256725300FBDIMM2R4 8GB (4x2GB) DDR2 667 ECC Fully Buffered memory upgrade

SKU CH-CVBS-6R9R4

Adds 8 GB of DDR2 ECC fully buffered memory in a matched four-module kit for compatible HP ProLiant servers and workstations

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 8 GB total capacity from four 2 GB modules
  • DDR2 667 speed with CL5 latency for responsive server performance
  • ECC and fully buffered design protects data integrity under heavy loads
  • 8 V operation reduces power draw in compatible ProLiant systems
  • 240-pin form factor fits HP/Compaq ProLiant ML150 G3 and listed servers

Fully Buffered DDR2 for ProLiant servers

This kit delivers 8 GB of DDR2-667 ECC memory in four 2 GB modules built to the PC2-5300 standard. Each 240-pin DIMM uses fully buffered architecture with 2Rx4 organisation and CL5 timing at 1.8 V. It is designed for HP/Compaq ProLiant servers and select workstations that require registered ECC modules.

Suits maintainers of listed G3–G5 ProLiant

Administrators upgrading DL360 G5, DL380 G5, ML350 G5 or ML370 G5 systems can use this kit to populate vacant slots. It is not for desktop PCs, laptops or any platform that accepts only unbuffered non-ECC DDR2. Buyers needing higher densities or faster speeds must verify their system supports larger fully buffered modules.

Check your server memory configurator before

Confirm the target machine accepts 240-pin fully buffered DDR2-667 ECC DIMMs and note the maximum supported capacity per slot. Verify the number of available slots and the required population order in the service manual. Ensure the BIOS revision in use recognises 2 GB 2Rx4 modules.

Punti di forza

  • 8 GB total capacity from four 2 GB modules
  • DDR2 667 speed with CL5 latency for responsive server performance
  • ECC and fully buffered design protects data integrity under heavy loads
  • 8 V operation reduces power draw in compatible ProLiant systems
  • 240-pin form factor fits HP/Compaq ProLiant ML150 G3 and listed servers

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM256725300FBDIMM2R4
Capacity8GB (4 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemHp/Compaq Proliant Ml150 G3
Package Content2 Memory RAM Sticks

Domande su questo articolo

Does this 4×2 GB DDR2-667 fully buffered kit require a server motherboard that supports FB-DIMM technology?

Yes, the modules are fully buffered DDR2 DIMMs and must be installed in a system designed for FB-DIMM memory such as the listed HP/Compaq ProLiant and workstation models.

Will the 2Rx4 rank organisation of these sticks work in a ProLiant ML150 G3 that currently uses 1Rx4 modules?

The kit is validated for the ML150 G3; the server's memory controller accepts the 2Rx4 configuration used by these 2 GB modules.

After installation, how can I confirm the kit is running at DDR2-667 with ECC active?

Check the BIOS memory information or the OS memory report — both should show 667 MHz speed and ECC enabled for the 8 GB total capacity.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.