Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board with black memory chips, 240-pin DDR3 DIMM, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 4GB DDR3 1600MHz Prodesk 600 G1 Sff Tower memory upgrade

SKU CH-CQY7-8CEFT

4GB DDR3 1600MHz unbuffered DIMM for HP ProDesk 600 G1 SFF and Tower systems

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4GB DDR3 1600MHz boosts ProDesk 600 G1 responsiveness
  • CL11 1.5V unbuffered DIMM installs without configuration
  • 240-pin non-ECC module matches HP factory spec
  • Single 4GB stick leaves three slots free for expansion
  • CMS lifetime warranty backs guaranteed compatibility

HP ProDesk 600 G1 SFF/Tower memory upgrade

This 4 GB DDR3 module is built specifically for HP ProDesk 600 G1 Series small-form-factor and tower desktops. It installs as a single 240-pin DIMM running at 1600 MHz with CL11 timing and 1.5 V operation. The unbuffered, non-ECC design matches the factory specification for these business PCs.

Suited for owners adding capacity to a supported

Buyers who need ECC error correction, registered modules, or speeds beyond DDR3 1600 should look elsewhere. The kit contains only one 4 GB stick, so systems requiring a matched pair for dual-channel operation will need a second identical module. Maximum platform memory is 32 GB across four slots.

Sustained workload behaviour

The module operates at the standard 1.5 V without a heat spreader, relying on case airflow for cooling during extended use. HP documentation notes the memory bus runs at 1066 MHz regardless of module rating, so bandwidth under continuous load reflects that lower bus speed. Stability is maintained through the validated CL11 11-11-11 timing profile.

Punti di forza

  • 4GB DDR3 1600MHz boosts ProDesk 600 G1 responsiveness
  • CL11 1.5V unbuffered DIMM installs without configuration
  • 240-pin non-ECC module matches HP factory spec
  • Single 4GB stick leaves three slots free for expansion
  • CMS lifetime warranty backs guaranteed compatibility

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Prodesk 600 G1 Series Sff/Tower
Package Content1 Memory RAM Stick

Domande su questo articolo

Does this 240-Pin DDR3 module require a free DIMM slot on an HP ProDesk 600 G1 SFF or Tower motherboard?

Yes, the module fits a standard 240-Pin DDR3 DIMM slot. The ProDesk 600 G1 SFF and Tower each provide four such slots, so at least one must be empty for installation.

If I keep existing DDR3-1333 or DDR3-1066 modules, will this 1600 MHz stick run at the slower speed?

The system memory bus operates at 1066 MHz regardless of module rating. Any faster module, including this 1600 MHz part, will downclock to match the bus speed when mixed with slower modules.

How can I confirm the 4 GB module is recognised after installation?

Enter the system BIOS or open the operating system memory information screen; both should report the additional 4 GB, raising total installed memory toward the 32 GB maximum supported by the platform.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.