Computer Memory Solutions
Computer Memory Solutions CM512646400SO 4GB DDR2 800 memory upgrade
4GB DDR2 800 SO-DIMM upgrade for Dell Latitude E6400 series, CL6 1.8V unbuffered
- Capacity4GB
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 800 (PC2 6400)
- CAS LatencyCL6
- Timing6-6-6
- Voltage1.8V
- 4GB capacity adds headroom for multitasking on Dell Latitude E6400 series
- DDR2 800 MHz speed matches the system's native memory bus
- CL6 6-6-6 timing keeps latency low for responsive operation
- 200-pin SO-DIMM form factor fits the laptop's memory slots directly
- Unbuffered non-ECC design suits standard consumer notebook requirements
4 GB DDR2-800 SO-DIMM for Dell Latitude E6400
This 4 GB module is a 200-pin DDR2 SO-DIMM rated at 800 MHz (PC2-6400) with CL6 timings and 1.8 V operation. It is built for the Dell Latitude E6400, E6400 ATG and E6400 XFR notebooks that accept DDR2 memory. The single stick uses unbuffered, non-ECC chips in a 2Rx8 configuration.
Suits owners of the listed Latitude models.
Buyers upgrading a compatible Latitude E6400 series laptop can install this module directly. Systems that require a different DDR generation, ECC or registered DIMMs, a different pin count or a voltage other than 1.8 V cannot use this part. Laptops limited to 2 GB per slot or a 4 GB total ceiling will not accept the full capacity.
200-pin DDR2 SO-DIMM form factor decides fit
The module's 200-pin SO-DIMM edge connector and DDR2 signalling are the single specification that determines whether it will seat and function. Only notebooks designed for 200-pin DDR2 SO-DIMMs at 800 MHz can use this upgrade.
Punti di forza
- 4GB capacity adds headroom for multitasking on Dell Latitude E6400 series
- DDR2 800 MHz speed matches the system's native memory bus
- CL6 6-6-6 timing keeps latency low for responsive operation
- 200-pin SO-DIMM form factor fits the laptop's memory slots directly
- Unbuffered non-ECC design suits standard consumer notebook requirements
Caratteristiche tecniche
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512646400SO |
| Capacity | 4GB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Timing | 6-6-6 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Latitude E6400, E6400 Atg, E6400 Xfr |
| Package Content | 1 Memory RAM Stick |
Domande su questo articolo
What speed does the DDR2 800 interface run at in practice?
The module operates at 800 MHz, matching the PC2 6400 rating for DDR2 SO-DIMM memory.
What physical slot and pin count does this 200-Pin DDR2 SO-DIMM require?
It fits a standard 200-pin DDR2 SO-DIMM socket, as used in the compatible Dell Latitude models.
How is the stick installed and which step is often missed?
Insert the module at an angle until the gold contacts are fully seated, then press down firmly until both side clips click into place.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.



