Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Four green DDR2 DIMMs with gold contacts and black chips

Computer Memory Solutions

Computer Memory Solutions CM512725300ECCREG2R4 16GB (4x4GB) DDR2 667 ECC Registered memory upgrade

SKU CH-Y10A-9R70K

A 16 GB registered ECC DDR2 kit of four 4 GB modules at 667 MHz for Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 and X7Dct-3F servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB kit (4 × 4 GB) for server memory expansion
  • DDR2 667 MHz (PC2-5300) speed for compatible Supermicro platforms
  • ECC registered 240-pin DIMMs protect data integrity
  • CL5 5-5-5 timing at 1.8 V for stable operation
  • 2Rx4 organisation with 18 chips per module

Server DDR2 ECC Registered kit

This 16 GB kit contains four 4 GB DDR2 667 modules built for Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 and X7Dct-3F servers. Each stick is a 240-pin registered DIMM with ECC and a 2Rx4 organisation. The kit targets administrators who need to populate all slots on these platforms with validated memory.

Sustained load behaviour

Registered buffering and ECC correction keep data integrity steady during continuous server workloads. The CL5 5-5-5 timings and 1.8 V operation are maintained across all four modules without throttling. The major-brand chipset supports the rated PC2-5300 bandwidth throughout extended duty cycles.

Thermals, noise and power

Modules run at the standard DDR2 1.8 V with no heat spreader unless current inventory includes one. Power draw stays within the DDR2 specification for registered DIMMs. Passive cooling in a server chassis keeps temperatures in check and adds no audible noise.

Punti di forza

  • 16 GB kit (4 × 4 GB) for server memory expansion
  • DDR2 667 MHz (PC2-5300) speed for compatible Supermicro platforms
  • ECC registered 240-pin DIMMs protect data integrity
  • CL5 5-5-5 timing at 1.8 V for stable operation
  • 2Rx4 organisation with 18 chips per module

Caratteristiche tecniche

BrandComputer Memory Solutions
ModelCM512725300ECCREG2R4
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemSupermicro X7Dcl-I X7Dct X7Dct-10G X7Dct-3, X7Dct-3F
Package Content1 Memory RAM Stick

Domande su questo articolo

How much heat and power will the 1.8 V DDR2 667 registered DIMMs add when the server runs all day?

Each module operates at 1.8 V with a CL5 5-5-5 timing; registered buffering reduces electrical load on the memory controller, keeping power draw and heat modest for continuous server operation.

What must the system already provide for these four 240-pin DIMMs to function?

A Supermicro X7Dcl-I, X7Dct, X7Dct-10G, X7Dct-3 or X7Dct-3F motherboard with four available 240-pin DDR2 slots that support ECC registered memory at PC2-5300 speed.

Will the 2Rx4 ECC registered kit work alongside older 512 MB or 1 GB DDR2 modules already installed in the same server?

The kit uses major-brand 18-chip 2Rx4 ICs at 667 MHz; mixing ranks or speeds can prevent the board from training, so populated slots should match this specification for stable operation.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.