DELL
DELL 400-ARSO 800 GB SATA 2.5" internal hard drive
An 800 GB solid-state drive for desktop PCs, using a 2.5 inch SATA interface for faster boot and file access than mechanical disks
- NAND Flash Memory TypeSolid State Drive
- 800 GB capacity stores large data sets
- SATA 6 Gbps interface enables fast transfers
- Solid-state design resists shocks and vibration
- Silent operation with no moving parts
- Lower power use reduces system heat
Dell 400-ARSO 800 GB SATA SSD
This Dell solid-state drive provides 800 GB of storage in a 2.5 inch form factor with a SATA 6 Gbps interface. It uses MLC NAND flash for mixed-use workloads and contains no moving parts. The non-mechanical design improves shock resistance and reduces noise, heat and power draw compared with traditional hard drives. It is a new component intended for internal desktop installation.
Suits Dell system owners adding fast SATA storage
This drive fits users who need a 2.5 inch SATA SSD to expand or replace storage in a compatible Dell desktop. The mixed-use MLC design handles both read and write demands typical of general computing and light server tasks. Builders whose chassis only accepts 3.5 inch bays without an adapter, or whose motherboard lacks a SATA 6 Gbps port, should consider a different form factor or interface.
SATA 6 Gbps interface determines compatibility
The drive connects via a standard SATA 6 Gbps (SATA/600) interface, which sets the maximum data transfer rate and dictates the required motherboard port and cable. Verify that the target system provides a SATA 6 Gbps connector and a 2.5 inch mounting location before purchase.
Punti di forza
- 800 GB capacity stores large data sets
- SATA 6 Gbps interface enables fast transfers
- Solid-state design resists shocks and vibration
- Silent operation with no moving parts
- Lower power use reduces system heat
Caratteristiche tecniche
| Brand | Dell |
|---|---|
| NAND Flash Memory Type | Solid State Drive |
Domande su questo articolo
What SATA port speed must my motherboard support for the 400-ARSO to run at its rated 6 Gbps?
The drive uses a SATA 6 Gbps interface; your motherboard needs a SATA 6 Gbps port to achieve the full transfer rate.
Can I keep my existing 3 Gbps SATA drives in the same system while adding this 6 Gbps SSD?
Yes, the 400-ARSO is backward compatible with SATA 3 Gbps ports, so older drives and this SSD can share the same controller.
How do I confirm the 800 GB capacity and 6 Gbps link speed are active after installation?
Check the drive properties in your OS or BIOS; they should report 800 GB capacity and a negotiated SATA 6 Gbps link speed.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
