DELL
DELL 72Y6W 4TB 3.5" SAS 7.2K 6Gb/s internal hard drive
A 4 TB enterprise SAS hard drive with a 7200 RPM spindle and 6 Gb/s transfer rate for 3.5-inch bays
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity4TB
- RPM7200 RPM
- Average Latency6Gb/s
- UsageFor Enterprise Storage
- 4 TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers responsive nearline performance
- SAS 6 Gb/s interface integrates with existing controllers
- 5 inch form factor fits standard drive bays
- Dell part 72Y6W ensures OEM compatibility
Dell 72Y6W 4TB SAS drive
The Dell 72Y6W is a 4TB 3.5 inch SAS hard drive built for enterprise storage arrays and servers. It delivers 7200 RPM performance over a 6Gb/s interface for nearline workloads.
Bare drive build and SAS connector
Supplied as a bare drive without a tray, it fits standard 3.5 inch bays that accept SAS connectors. The 6Gb/s SAS link provides dual-port redundancy for continuous operation in RAID enclosures.
Verify SAS controller and bay compatibility
Confirm your backplane or HBA supports 6Gb/s SAS and supplies the correct power connector. Ensure the chassis has an open 3.5 inch slot and that your RAID firmware recognises the 72Y6W part number.
Punti di forza
- 4 TB capacity stores large enterprise datasets
- 7200 RPM spindle delivers responsive nearline performance
- SAS 6 Gb/s interface integrates with existing controllers
- 5 inch form factor fits standard drive bays
- Dell part 72Y6W ensures OEM compatibility
Caratteristiche tecniche
| Brand | Dell |
|---|---|
| Model | 72Y6W |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
Domande su questo articolo
What does the SAS 6Gb/s interface mean for real-world transfer limits on this 4TB drive?
The 6Gb/s SAS link sets the bus ceiling; actual throughput depends on the 7200 RPM platters and workload.
Will the 3.5 inch form factor fit my server tray without an adapter?
The drive is a standard 3.5 inch unit; it mounts directly in any 3.5 inch bay or hot-plug tray that accepts bare drives.
How do I install this Nearline SAS drive in a Dell PowerEdge and what step is often missed?
Slide the bare drive into the carrier, secure the screws, insert the carrier until it clicks, then ensure the RAID controller recognises the new SAS device before initialising.
Anche in questo reparto
Anche i clienti hanno confrontato questi
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
