Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
22-piece nozzle cleaning kit with 1.5mm clog poke 20 needles and wire brush

EILKBLA 22Pcs 3D Printer Nozzle Cleaning Kit 1.5mm Clog Remover Tool

SKU CH-A3C9-AJ76W

A 22-piece kit with a 1.5mm clog poke for 1.75mm filament, 20 precision 0.4mm needles, and a wire brush to clear jams and maintain nozzles on most FDM printers

  • Typeno clogger 3d printer tool
  • Clears hotend jams without disassembly using the 1.5mm clog poke for 1.75mm filament
  • Restores smooth extrusion with 20 precision 0.4mm needles for 0.4mm nozzles
  • Prevents buildup on nozzle tip and heater block with the included wire brush
  • Fits most FDM printers with the 1.5mm poke and brush; needles match 0.4mm nozzles
  • Complete 22-piece kit covers clog removal, fine debris cleaning and regular maintenance

22-piece nozzle cleaning kit

This 22-piece nozzle cleaning kit provides essential tools for clearing filament jams and residue on FDM 3D printers. It is designed for hobbyists and professionals who want reliable maintenance without disassembling the hotend.

1.5 mm clog poke and 0.4 mm needles

The 1.5 mm clog poke pushes out stuck 1.75 mm filament directly through the nozzle opening, avoiding teardown time. Twenty 0.4 mm needles target fine debris inside 0.4 mm nozzles, while the wire brush scrubs the nozzle tip and heater block to prevent buildup.

0.4 mm needle diameter for 0.4 mm nozzles

The 0.4 mm cleaning needles match standard 0.4 mm nozzles, making this the deciding specification for compatibility. Printers with different nozzle diameters will need alternative needle sizes not included in this kit.

Punti di forza

  • Clears hotend jams without disassembly using the 1.5mm clog poke for 1.75mm filament
  • Restores smooth extrusion with 20 precision 0.4mm needles for 0.4mm nozzles
  • Prevents buildup on nozzle tip and heater block with the included wire brush
  • Fits most FDM printers with the 1.5mm poke and brush; needles match 0.4mm nozzles
  • Complete 22-piece kit covers clog removal, fine debris cleaning and regular maintenance

Caratteristiche tecniche

BrandEILKBLA
Modelno clogger 3d printer tool
Part Numberno clogger 3d printer tool
Typeno clogger 3d printer tool

Domande su questo articolo

How often will I need to replace the 0.4 mm cleaning needles in this 22-piece kit?

The kit contains 20 needles at 0.4 mm diameter; they are consumable items that wear or bend with repeated use, so keep spares on hand and replace individual needles whenever the tip deforms or no longer passes cleanly through the nozzle.

What is the first limitation I will hit when clearing a badly clogged 0.4 mm nozzle with these tools?

The 0.4 mm needles match the nozzle bore exactly, so they cannot pass through openings smaller than 0.4 mm; if the blockage is harder than the needle or the nozzle interior is damaged, the needle will stop or break before the jam clears.

Does the 1.5 mm clog poke generate heat or require power during extended cleaning sessions?

No, the 1.5 mm clog poke is a simple unpowered metal tool that you insert by hand into a heated hot-end for 1.75 mm filament; it produces no heat or noise of its own and draws no electricity.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.