Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Small black rectangular ARGB hub with ten 3-pin ports and SATA power connector

EN-Labs

EN-Labs 5V 3Pin ARGB LED Hub 10 Way SATA Powered motherboard accessory

SKU CH-5ZAP-PHAT8

SATA-powered hub expands a single 5 V ARGB header to ten addressable channels with a 1.64 ft extension cable and adhesive mount

  • Control 10 ARGB devices from one motherboard header
  • SATA power prevents motherboard RGB port overload
  • 64 ft extension cable reaches distant fans
  • Adhesive backing secures hub inside any case
  • Designed only for 5V addressable RGB, not 12V

5V ARGB hub for 10 devices

This 5V 3-pin ARGB LED hub expands a single motherboard addressable RGB header into ten channels. It is built for 5V AURA RGB lighting only and does not work with 12V RGB devices. Builders synchronising multiple fans or LED strips from one header will find it suitable. The hub draws power through a SATA connector linked to the power supply.

Motherboard header limited to 15 watts

The motherboard 5V RGB header typically supplies at least 5V/3A, which equals 15W total for all connected devices. The hub itself adds no extra power capacity. If connected lighting appears dim, the header is overloaded and the builder must reduce the number of devices or add a separate 5V molex feed from the PSU. Cable runs should stay under 3.3 ft for reliable signal quality.

Adhesive mount and keyed connectors

A 3M self-stick pad on the underside lets the hub attach securely inside the case. Arrow markings on each plug must align with the 5V pin on both the motherboard and the hub to avoid misconnection. A 1.64ft female-to-female RGB extension cable is included for flexible routing. The SATA power lead requires a free connector from the PSU.

Punti di forza

  • Control 10 ARGB devices from one motherboard header
  • SATA power prevents motherboard RGB port overload
  • 64 ft extension cable reaches distant fans
  • Adhesive backing secures hub inside any case
  • Designed only for 5V addressable RGB, not 12V

Caratteristiche tecniche

Nessuna caratteristica ancora pubblicata per questo articolo.

Domande su questo articolo

Should I pick the 10-port hub or a smaller one for my build?

The hub provides ten 5 V ARGB headers so you can run up to ten addressable RGB fans or strips from a single motherboard connector, ideal when the board only has one or two 5 V headers.

What does the 15 W motherboard limit mean once the hub is installed?

The motherboard 5 V header typically supplies 3 A (15 W); the hub adds no extra power, so total connected lighting must stay within that budget or LEDs will dim.

How does the SATA power connector affect what I can plug in?

The SATA lead powers the hub circuitry only; it does not increase the 5 V current available to the ARGB devices, which are still capped by the motherboard header rating.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.